To Next PageTo Next PageHow to fix a Brother Label Maker P-touch that is not printing correctly?
If the Brother P-touch Label Maker isn't printing correctly, make sure the tape cassette is firmly clicked into place. Clean the print head with a cotton swab or the optional print head cleaning cassette (TZ-CL4). If the battery indicator is on, charge the rechargeable battery pack.
What to do if my Brother PT 7600 - P-touch EDGE 7600 B/W Thermal Transfer Printer P-touch doesn't print when I press print?
If your Brother P-touch Label Maker is not printing after pressing the print button, first ensure that you have entered text, as the label maker won't print without it. Check that the tape cassette is correctly installed and has enough tape remaining. If the tape end is bent, cut the bent section and thread the tape through the exit slot. If the tape is jammed, remove the cassette, carefully pull out the jammed tape, cut it, and ensure the tape end passes through the guide before reinstalling. Finally, make sure the tape compartment cover is closed correctly.
Why does my Brother Label Maker P-touch stop printing mid-label?
If the Brother P-touch Label Maker stops printing, it could be due to a lack of tape in the cassette; the striped tape indicates the end of the roll. Replace the tape cassette when this occurs. Alternatively, weak batteries or disconnection from the AC adapter can cause this issue. Replace the batteries or connect the AC adapter directly to the label maker.
What to do if the display remains blank on my Brother PT 7600 - P-touch EDGE 7600 B/W Thermal Transfer Printer P-touch?
If your Brother P-touch Label Maker display is blank after turning it on, ensure the AC adapter is correctly connected and designed for your specific model. If using the AD-18 adapter, confirm it's the correct one included in the package. Also, check and reinstall the battery. For PT-7600 models, ensure the rechargeable battery pack is sufficiently charged, as its charge may deplete even when not in use.
How to unlock a frozen Brother PT 7600 - P-touch EDGE 7600 B/W Thermal Transfer Printer Label Maker P-touch?
If the screen of your Brother P-touch Label Maker 'locks' or becomes unresponsive, try resetting the internal memory to its initial settings. If this doesn't solve the issue, disconnect the AC adapter and remove the battery for more than 10 minutes.
Why is the ink ribbon separating on my Brother Label Maker P-touch?
If the ink ribbon separates from the ink roller in your Brother P-touch Label Maker, it might be because the ink ribbon in the tape cassette is loose, or you pulled on the label as it came out. If the ribbon is broken, replace the tape cassette. If not, leave the tape uncut, remove the cassette, and wind the loose ribbon onto the spool.
Why are my saved label files empty on my Brother PT 7600 - P-touch EDGE 7600 B/W Thermal Transfer Printer Label Maker P-touch?
If label files saved previously on your Brother P-touch Label Maker are now empty, it's possible that the batteries and AC adapter were disconnected for more than two minutes, or the batteries have run out of power, leading to data loss in the internal memory. Also, using the reset function will clear all stored data, including label files.
General| Brand | Brother |
|---|---|
| Model | PT 7600 - P-touch EDGE 7600 B/W Thermal Transfer Printer |
| Category | Label Maker |
| Language | English |
Details on what the product, consumables, and accessories include under warranty.
Exclusions from the limited warranty, such as physical damage or misuse.
Steps to follow for warranty service, including contact information and required documentation.
Introduction to safety guidelines and symbols used in the manual.
Critical warnings regarding rechargeable battery packs and AC adapters.
Important cautions for operating the tape cutter, AC adapter, batteries, and labeler.
General advice to prevent damage and ensure proper usage of the labeler.
Check the package contents before using the P-touch labeler.
Details on powering the labeler using AC adapter, batteries, or rechargeable battery pack.
Information on installing and using TZ tape cassettes with the labeler.
Guide to selecting different label type modes for various applications.
Details on using Rotate and Rotate & Repeat modes for cable and wire labeling.
Instructions for using Flag mode for wrapping labels around cables or wires.
Instructions for entering and editing text, characters, and spaces.
How to specify label length, margins, frames, character size, width, and style.
Steps for previewing layouts, feeding tape, and printing labels.
Configuring how tape is fed out and cut after printing.
How to change the contrast of the labeler's LCD display.
Steps for installing P-touch Editor, printer driver, and transfer manager.
Guide to transferring templates, databases, and character images.
How to search database records by specific characters or numbers.
Solutions for common problems encountered with the P-touch labeler.
Explanation of error messages and their corresponding causes and solutions.
Technical details and specifications for the P-touch labeler's main unit.
