To Next PageTo Next PageWhat to do if Brother P-touch PT-2030 Label Maker displays 'Insert 9mm Tape Cassette!'?
If your Brother Label Maker displays 'Insert 9mm Tape Cassette!', it means an 9 mm tape cassette is not installed when an Auto-Format for 9 mm tape is selected. Install a 9 mm tape cassette.
What to do if the label is not printed after pressing the Print key on Brother Label Maker?
• Make sure that you have entered text and that the tape cassette is correctly installed and contains sufficient tape. • If the tape is bent, cut off the bent section and thread the tape through the tape exit slot. • If the tape is jammed, remove the tape cassette, pull out the jammed tape, and cut it. Before reinstalling the tape cassette, ensure the end of the tape passes through the tape guide.
Why does my Brother Label Maker stop while printing a label?
• If you see striped tape, it means you've reached the end of the tape, so replace the tape cassette. • Alternatively, replace all the batteries or connect the AC adapter directly to the label maker.
What to do if my Brother Label Maker displays 'Insert Tape Cassette!'?
The 'Insert Tape Cassette!' message indicates that there is no tape cassette installed when you try to print or preview a label, or feed tape. Install a tape cassette before continuing.
What to do if Brother P-touch PT-2030 displays 'Insert 6mm Tape Cassette!'?
If your Brother Label Maker displays 'Insert 6mm Tape Cassette!', it means an 6 mm tape cassette is not installed when an Auto-Format for 6 mm tape is selected. Install a 6 mm tape cassette.
What to do if Brother P-touch PT-2030 Label Maker displays 'Check # of Digits Entered!'?
If your Brother Label Maker displays 'Check # of Digits Entered!', it means the number of digits entered in the bar code data does not match the number of digits set in the bar code parameters. Enter the correct number of digits.
What to do if Brother P-touch PT-2030 displays 'Tape Width Limit! Max 3 Lines'?
If your Brother Label Maker displays 'Tape Width Limit! Max 3 Lines', it means there are more than three lines of text when you press the Print or Preview key while using 12 mm tape. Limit the number of lines to three, or replace with a larger width tape cassette.
What to do if Brother P-touch PT-2030 Label Maker displays 'Tape Width Limit! Max 2 Lines'?
If your Brother Label Maker displays 'Tape Width Limit! Max 2 Lines', it means there are more than two lines of text when you press the Print or Preview key while using 9 mm or 6 mm tape. Limit the number of lines to two, or replace with a larger width tape cassette.
What to do if Brother Label Maker displays 'Wrong Type Of Adapter Connected!'?
If your Brother Label Maker shows 'Wrong Type Of Adapter Connected!', it means an incompatible AC adapter is connected. After the power turns off automatically, use the AC adapter designed exclusively for your P-touch labeler.
What to do if Brother P-touch PT-2030 Label Maker displays 'No Text!'?
If your Brother Label Maker displays 'No Text!', it means there is no text, symbols or bar code data entered when you try to print or preview a label. Enter data before continuing.
General| Model | PT-2030 |
|---|---|
| Series | P-touch |
| Print Technology | Thermal transfer |
| Maximum Print Width | 12 mm |
| Print Resolution | 180 dpi |
| Display | LCD |
| Display Size | 1 line |
| Keyboard | QWERTY |
| Power Source | AC adapter or 6 AA batteries |
| Tape Size | 3.5 mm, 6 mm, 9 mm, 12 mm |
| Cutter | Manual |
| Multi-block Printing | Yes |
| Mirror Printing | Yes |
| Vertical Printing | Yes |
| Tape Compatibility | TZe |
| Tape Type | Laminated |
| Styles | Bold, Italic |
| Symbols | Yes |
| AC Adapter | AD-24 |
| Type | Desktop Label Maker |
| Label Width | 6, 9, 12 mm |
| Print Speed | 10 mm/s |
Essential safety guidelines and warnings to prevent injury or damage when using the P-touch labeler.
General warnings and advice for operating the P-touch labeler to avoid damage, malfunction, or incorrect usage.
Detailed explanation of the LCD display elements and the function of each key on the P-touch keyboard.
Identification and description of the purpose of each key on the P-touch labeler's control panel.
Methods for inputting, editing, adding new lines, and moving text within a label design.
Instructions on how to delete characters one by one or clear all text and formatting from a label.
Options for customizing font, size, width, style, and alignment for text on labels.
Guidance on setting up and creating one-dimensional bar code labels for various applications.
Procedures for printing single or multiple copies, including auto-numbering and mirror printing.
Steps for saving created label designs into the P-touch's internal file memory for later retrieval.
How to reset the labeler's internal memory and settings to their original factory defaults.
Solutions for common problems such as the screen locking, blank display, or incorrect language.
Explanations of various error messages and their corresponding causes and remedies.
