Why is the display blank on my Brother P-touch PT-2460 after turning it on?
If the display on your Brother Label Maker stays blank after you turn it on, there could be a few reasons. First, check that the AC adapter (model H/H1) is connected correctly. If you're using batteries, make sure they are correctly inserted. Finally, if the batteries are low, replace them with new ones.
What to do if printed characters are not formed properly on my Brother Label Maker?
If the printed characters on your Brother Label Maker are not formed properly, the batteries may have a low charge. Try using the AC adapter, or replace the batteries with new ones.
How to fix a Brother P-touch PT-2460 Label Maker that doesn't print or prints blurred characters?
If your Brother Label Maker isn't printing or the printed characters are blurred, check that the back cover is properly attached. Also, if the tape cassette is empty, replace it with a new one.
How to remove a blank horizontal line on printed labels from my Brother Label Maker?
If a blank horizontal line appears through the printed label on your Brother Label Maker, clean the print head.
What to do if my Brother P-touch PT-2460 Label Maker P-touch has locked up?
If your Brother P-touch label maker has locked up (meaning nothing happens when you press a key), turn it off. Then, while holding down the 'g' and 'R' keys, turn the machine back on.
Why are the text files I stored in the memory of my Brother Label Maker gone?
If the text files you stored in the memory of your Brother Label Maker are no longer there, it may be because the batteries are low. Replace them with new ones.
Why does striped tape appear when using my Brother Label Maker?
If striped tape appears when using your Brother Label Maker, you have reached the end of the tape. Replace the tape cassette with a new one.
Important safety and operational guidelines to follow when using the P-touch machine and accessories.
Procedures for cleaning the print head, rollers, and tape cutter of the P-touch machine.
Methods for entering and editing text, including characters, spaces, and cursor movement.
Options for specifying label length, margin size, and applying text framing.
Steps for previewing label layout, feeding tape, and printing labels with options.
Configuring cut-pause and chain printing settings for tape feeding and cutting.
Solutions for common problems encountered while operating the P-touch machine.
Explanations of error messages and their corresponding causes and solutions.
General| Model | PT-2460 |
|---|---|
| Series | P-touch |
| Device Category | Label Maker |
| Print Technology | Thermal Transfer |
| Print Resolution | 180 dpi |
| Maximum Print Width | 18 mm |
| Keyboard | QWERTY |
| Display | LCD |
| Cutter | Manual |
| Power Source | AC Adapter or 6 AA batteries |
| Maximum Print Speed | 10 mm/sec |
| Tape Sizes | 6 mm, 9 mm, 12 mm, 18 mm, 24 mm |
| Weight | 470 g |
| Tape Type | TZe tape |
To Next Page