Why is my Brother P-touch PT-2600 not printing clearly?
If your Brother Label Maker is not printing or the printed characters are blurred, verify that the tape cassette has been inserted correctly and is not empty (replace if needed). Also, ensure the tape compartment cover is closed and the interface cable is correctly connected.
How to fix Brother P-touch PT-2600 Label Maker when printed characters are not formed properly?
If the printed characters on your Brother Label Maker are not formed properly, and you're using alkaline batteries, they might be low. Try using the AC adapter or replace the batteries with new ones.
What to do if Brother P-touch PT-2600 prints striped tape?
If your Brother Label Maker is printing striped tape, it means you've reached the end of the tape. Replace the tape cassette with a new one.
What to do if Brother Label Maker has locked up?
If your Brother Label Maker has locked up (nothing happens when a key is pressed), turn off the machine. Then, while holding down the 'c' and 'R' keys, turn the machine back on. Note that this will erase the text and formats in the display and all text files stored in the memory.
What to do if Brother P-touch PT-2600 Label Maker display is blank?
If the display of your Brother Label Maker stays blank after turning it on, make sure the AC adapter is correctly connected. If you're using alkaline batteries, check they're properly inserted. If the batteries are low, replace them with new ones.
Why did my Brother P-touch PT-2600 erase stored text files?
If the text files you stored in the memory of your Brother Label Maker are no longer there, it may be due to low batteries. Replace them with new ones.
Lists essential safety guidelines and precautions for using the P-touch.
Instructions for installing and changing tape cassettes.
Details how to connect the P-touch to a computer via USB.
Step-by-step guide for installing the necessary software and drivers.
Step-by-step guide for installing P-Touch Editor 3.2 on a PC.
Guide for installing P-Touch Quick Editor software on a PC.
Instructions for installing the printer driver on Windows systems.
Step-by-step guide for installing P-Touch Editor 3.2 on Macintosh.
Guide for installing P-Touch Quick Editor software on Macintosh.
Explains how to start and use the P-touch Editor 3.2 software for label design.
Instructions for typing and editing text directly on the P-Touch device.
Steps to remove P-Touch Editor and Quick Editor from a PC.
Lists common problems and their solutions for the P-Touch printer.
Explains error messages and provides remedies for P-Touch operational issues.
General| Model | PT-2600 |
|---|---|
| Type | Label Maker |
| Print Technology | Thermal transfer |
| Print Speed | 10 mm / sec |
| Memory | Up to 30 labels |
| Dimensions | 6.5 x 11.2 x 4.0 inches |
| Weight | 2.2 lbs |
| Display | LCD |
| Keyboard | QWERTY |
| Resolution | 180 dpi |
| Maximum Print Width | 24 mm |
| Power Source | AC Adapter or 6 AA Batteries |
| Tape Width | 12 mm |
| Label Width | 6 mm, 9 mm, 12 mm |
| Tape Cassettes | TZ |
To Next Page