Brother P-touch PT-2700

Questions and Answers

W
wfarrellAug 12, 2025
What to do if the Brother P-touch PT-2700 Label Maker is not printing?
- J
  jacksonlindseyAug 13, 2025
  If your Brother Label Maker isn't printing, several factors could be at play. First, confirm that you've actually entered text, as no label will print without it. Next, double-check that the tape cassette is correctly installed and contains sufficient tape. Also, inspect the tape's end for any bends; if present, trim the bent section and properly thread the tape through the exit slot. Finally, if the tape is jammed, carefully remove the cassette, extract the jammed portion, cut the tape, and ensure the tape's end is guided correctly before reinstalling the cassette.
J
Jason AdkinsAug 16, 2025
How to fix Brother Label Maker when the label is not printing correctly?
- D
  David JordanAug 17, 2025
  If your Brother Label Maker isn't printing labels correctly, start by ensuring the tape cassette is firmly installed until it clicks into place. If the print head is dirty, clean it with a cotton swab or the optional print head cleaning cassette (TZ-CL4). Also, check the Cut Option setting. If it's set to Chain or No Cut, the tape won't feed after printing; adjust the setting or hold the key and press the key to feed and cut the tape.
M
Megan FrancisAug 19, 2025
What to do if Brother P-touch does not respond?
- K
  Kristen RogersAug 20, 2025
  If the screen 'locks' or your Brother P-touch isn't responding normally, reset the internal memory to the initial settings. If resetting doesn't solve the problem, disconnect the AC adapter and remove the batteries for more than 10 minutes.
N
nwilsonAug 23, 2025
Why is the screen blank on my Brother P-touch PT-2700?
- S
  Sara JohnsonAug 23, 2025
  If the display remains blank after turning on your Brother Label Maker, check a few things: ensure the AC adapter designed specifically for your P-touch is correctly connected. If you're using an AC adapter, verify it's the one included with your label maker. If you're using batteries, try removing and reinstalling them.
T
Troy ContrerasAug 27, 2025
Why does my Brother P-touch PT-2700 Label Maker stop in the middle of printing?
- A
  Anna DavisAug 27, 2025
  If your Brother P-touch label maker stops while printing, it could be due to a couple of reasons. First, check if there's enough tape remaining in the cassette. The striped tape indicates the end is near, so replace the cassette. Second, if you're running on batteries, they might be weak. Try replacing all the batteries or connecting the AC adapter directly to the P-touch.
J
Jason PowellAug 31, 2025
How to make my Brother P-touch PT-2700 cut automatically?
- K
  Kyle StewartAug 31, 2025
  If your Brother Label Maker isn't cutting labels automatically, first check the Cut Option setting. If it's set to Chain or No Cut, the tape won't feed for cutting. Adjust the setting or manually feed and cut the tape by holding the key and pressing the key. Also, if using Fabric Iron-On or Extra Strength Adhesive Tapes, you'll need to cut manually with scissors. For other tapes, ensure Manual Cutting is set to OFF.
A
Adam RoweSep 3, 2025
What to do if label files are empty on Brother P-touch PT-2700?
- S
  sandrawillisSep 3, 2025
  If your saved label files are now empty on your Brother Label Maker, it could be due to a few reasons. All files stored in the internal memory are lost if the batteries and AC adapter are disconnected for more than one minute, or if the batteries are empty. Also, using the reset function will clear all data stored in the internal memory, including label files.
J
Julie PeckSep 8, 2025
Why is the ink ribbon separated on my Brother P-touch PT-2700 Label Maker?
- A
  Alison ParkerSep 8, 2025
  The ink ribbon might separate from the ink roller on your Brother Label Maker if the ink ribbon in the tape cassette is loose, or if you pulled on the label as it came out. If the ink ribbon is broken, replace the tape cassette. Otherwise, leave the tape uncut, remove the cassette, and wind the loose ink ribbon onto the spool.

Summary

INTRODUCTION

What You Can Do

Overview of the printer's capabilities and functions.

Safety Precautions

Important notes to prevent injury and damage to the P-touch.

General Precautions

General guidelines for using the P-touch and its accessories.

GETTING STARTED

Unpacking Your P-touch

Check the package contents before using the P-touch.

General Description

Overview of the P-touch's main components and features.

LCD Display & Keyboard

Explanation of the LCD display elements and their functions.

Key Names and Functions

Description of each key and its function on the P-touch.

Battery

Instructions for installing and using batteries.

AC Adapter

Instructions for connecting and using the AC adapter.

Inserting a Tape Cassette

Step-by-step guide on how to insert a tape cassette.

Turning Power On;Off

How to turn the P-touch on and off, and auto power-off features.

Feeding Tape

How to feed tape using the Feed & Cut function.

LCD Contrast

How to adjust the contrast of the LCD display.

Display Mode

How to change the display mode and screen configurations.

Back Light

How to turn the LCD back light on and off.

Setting Language and Unit

How to set the display language and unit of measurement.

EDITING A LABEL

Entering and Editing Text

Instructions for typing and modifying text on the label.

Entering Symbols

Methods for inserting symbols using the keyboard or function.

Entering Accented Characters

How to enter accented characters and special symbols.

Setting Character Attributes

How to set font, size, width, style, and alignment for text.

Using Auto-Format Layouts

How to create labels quickly using pre-defined templates.

Using Block Layouts

How to create labels using pre-defined block layouts.

Using Time & Date Function

How to add date and time information to labels.

Creating a Bar Code Label

How to create labels with one-dimensional bar codes.

LABEL PRINTING

Label Preview

How to check the label layout before printing.

Printing a Label

General information on printing labels, including multiple copies.

Printing Multiple Copies

How to print up to 99 copies of the same label.

Auto-numbering Labels

How to create sequentially numbered labels.

Mirror Printing

How to print labels in reverse for viewing from the other side.

Tape Cutting Options

How to specify tape feeding and cutting methods.

Attaching Labels

Instructions for attaching printed labels to surfaces.

USING THE FILE MEMORY

Storing a Label into Memory

How to save created labels into the P-touch's file memory.

Opening a Stored Label File

How to retrieve saved labels from the file memory.

Printing a Stored Label File

How to print labels that have been saved in memory.

Deleting a Stored Label File

How to remove saved labels from the file memory.

MAINTAINING YOUR P-touch

Resetting the P-touch

How to reset the P-touch to its initial settings.

Maintenance

General advice for keeping the P-touch in good condition.

Cleaning the Main Unit

How to clean the exterior of the P-touch.

Cleaning the Print Head

How to clean the print head for better print quality.

Cleaning the Tape Cutter

How to clean the tape cutter blade to prevent jams.

TROUBLESHOOTING

What to do when...

Troubleshooting common problems and their solutions.

Error Messages

List of error messages and how to resolve them.

APPENDIX

Specifications

Technical specifications of the P-touch PT-2700.

Accessories

List of available accessories and tapes for the P-touch.

INDEX

Index

Alphabetical list of topics for quick reference.

Brother P-touch PT-2700 Specifications

General

Type	Label Maker
Model	PT-2700
Series	P-touch
Brand	Brother
Print Technology	Thermal transfer
Print Method	Direct thermal
Print Resolution	180 dpi
Maximum Resolution	180 dpi
Keyboard	QWERTY
Display	LCD
Power Source	AC adapter or 6 AA batteries
Cutter	Manual
Weight	1.5 lbs
Maximum Print Speed	10 mm/sec
Tape Width	6 mm, 9 mm, 12 mm
Label Cassettes	TZe
Print Speed	10 mm/sec