1
2
3
4
5
6
7
8
9
35
z EDITING A LABEL
Setting Character Attributes
Setting Auto Fit Style
When "Size" is set to "Auto" and "Length" is set to a specific length, you can select
the way of reducing the text size to fit within the label length.
When "Text Size" is selected, the total text size is modified to fit within the label.
When "Text Width" is selected, the text width will be reduced to the size of x1/2
setting. (If further size reduction is required to fit the text into the selected label
length, the total text size will be modified after reducing the text width to x1/2 setting.)
Press the key to display the Setup menu, Select
"Auto Fit Style" using the or keys, and then
press the or key.
The Auto Fit Style screen is displayed.
Select the style using the or keys.
Press the or key to apply the setting.
Align
(Alignment)
Left
Center
Right
Just
(Justify)
Attribute Value Result
1
2
3
• Press the key to return to the previous step.
• Press the key to set the style to the default setting ("Text Size").
To Next Page
Loading...
