To Next PageTo Next PageWhat to do if my Brother Label Maker displays 'Insert Tape Cassette!'?
The 'Insert Tape Cassette!' message indicates that there is no tape cassette installed when you try to print or preview a label, or feed tape. Install a tape cassette before continuing.
What to do if my Brother P-touch PT-2030 screen ‘locks’?
Reset the internal memory to the initial settings. If resetting the label maker doesn't solve the problem, disconnect the AC adapter and remove the batteries for more than 10 minutes.
What to do if Brother P-touch PT-2030 Label Maker displays 'Insert Tape Cassette!'?
If your Brother Label Maker displays 'Insert Tape Cassette!', it indicates that there is no tape cassette installed when you try to print or preview a label, or feed tape. Install a tape cassette before continuing.
What to do if the label is not printed after pressing the Print key on Brother Label Maker?
• Make sure that you have entered text and that the tape cassette is correctly installed and contains sufficient tape. • If the tape is bent, cut off the bent section and thread the tape through the tape exit slot. • If the tape is jammed, remove the tape cassette, pull out the jammed tape, and cut it. Before reinstalling the tape cassette, ensure the end of the tape passes through the tape guide.
Why does my Brother Label Maker stop while printing a label?
• If you see striped tape, it means you've reached the end of the tape, so replace the tape cassette. • Alternatively, replace all the batteries or connect the AC adapter directly to the label maker.
Why does my Brother P-touch PT-2030 display remain blank?
Check that the batteries are correctly installed and that the AC adapter (designed exclusively for your label maker) is correctly connected.
Why Brother P-touch PT-2030 stops while printing?
If your Brother Label Maker stops while printing a label, replace the tape cassette if striped tape is visible, as this indicates that you have reached the end of the tape. Also, try replacing all the batteries or connecting the AC adapter directly to the P-touch labeler.
What to do if Brother Label Maker display is blank?
If the display of your Brother Label Maker remains blank after turning on the power, check that the batteries are correctly installed and that the AC adapter designed exclusively for your P-touch labeler (provided) is correctly connected.
What to do if the label is not printed correctly on my Brother P-touch PT-2030?
• Remove the tape cassette and reinstall it, pressing firmly until it clicks into place. • If the print head is dirty, clean it with a cotton swab or an optional print head cleaning cassette (TZ-CL4).
How to fix 'Cutter Error!' on Brother P-touch PT-2030?
The 'Cutter Error!' message indicates that the tape cutter is closed when you try to print or feed tape. Turn the label maker off and then on again. If tape is tangled in the cutter, remove it.
General| Model | PT-2030 |
|---|---|
| Series | P-touch |
| Print Technology | Thermal transfer |
| Maximum Print Width | 12 mm |
| Print Resolution | 180 dpi |
| Display | LCD |
| Display Size | 1 line |
| Keyboard | QWERTY |
| Power Source | AC adapter or 6 AA batteries |
| Tape Size | 3.5 mm, 6 mm, 9 mm, 12 mm |
| Cutter | Manual |
| Multi-block Printing | Yes |
| Mirror Printing | Yes |
| Vertical Printing | Yes |
| Tape Compatibility | TZe |
| Tape Type | Laminated |
| Styles | Bold, Italic |
| Symbols | Yes |
| AC Adapter | AD-24 |
| Type | Desktop Label Maker |
| Label Width | 6, 9, 12 mm |
| Print Speed | 10 mm/s |
Essential safety guidelines and warnings to prevent injury or damage when using the P-touch labeler.
General warnings and advice for operating the P-touch labeler to avoid damage, malfunction, or incorrect usage.
Detailed explanation of the LCD display elements and the function of each key on the P-touch keyboard.
Identification and description of the purpose of each key on the P-touch labeler's control panel.
Methods for inputting, editing, adding new lines, and moving text within a label design.
Instructions on how to delete characters one by one or clear all text and formatting from a label.
Options for customizing font, size, width, style, and alignment for text on labels.
Guidance on setting up and creating one-dimensional bar code labels for various applications.
Procedures for printing single or multiple copies, including auto-numbering and mirror printing.
Steps for saving created label designs into the P-touch's internal file memory for later retrieval.
How to reset the labeler's internal memory and settings to their original factory defaults.
Solutions for common problems such as the screen locking, blank display, or incorrect language.
Explanations of various error messages and their corresponding causes and remedies.
