If the NFC LED is not lit
Press and hold the Wireless Mode button for one second to activate the NFC function. After the NFC LED is lit, release the button.
For iPrint&Label users
For Mobile Cable Label Tool users
For iPrint&Label users
1. Activate the Near Field Communication (NFC) function on your mobile device: tap [Settings] - [Wireless and Network] - [Others], and make sure the toggle button of [NFC] is ON.
2. Touch your device to the NFC mark on the printer.
The device will detect the printer’s wireless settings.
3. When your device receives the settings information from the printer, iPrint&Label will start automatically.
Make sure you have iPrint&Label installed. If it is not installed on the device, the Google Play™ Store app will be displayed.
4. The printer’s NFC LED will turn off and then on again. The connection is now established.
You can now print from your device wirelessly.
For Mobile Cable Label Tool users
1. Activate the NFC function on your mobile device: tap [Settings] - [Wireless and Network] - [Others], and make sure the toggle button of [NFC] is ON.
2. Start the Mobile Cable Label Tool, and then open the label editing screen or printer settings screen.
3. Touch your device to the NFC mark on the printer.
The device will detect the printer’s wireless settings.
4. The printer’s NFC LED will turn off and then on again. The connection is now established.
You can now print from your device wirelessly.
[ Back To Top ]
Connect using a computer (Wireless Direct)
1. Turn the printer on.
2. Make sure the Wi-Fi LED is lit on the printer.
If the Wi-Fi LED is not lit
a. Press and hold the Wireless Mode button for one second to turn on the wireless mode.
b. After the Wi-Fi LED is lit, release the Wireless Mode button. The Wi-Fi LED begins flashing.
3. Enable the printer’s wireless settings using your computer:
For Windows
For Mac
Windows
Make sure the printer driver and the Printer Setting Tool are installed in your computer. If not, download and install them from the [Downloads] section of this website.
Make sure the printer is on, and then connect it to the computer with a USB cable.
1. Start the Printer Setting Tool on the computer, and click [Communication Settings].
For more information about the Printer Setting Tool, see the FAQ: "Using the Printer Setting Tool (for Windows)".
2. In the [General] tab, click [Communication Settings], and then make sure that.
[Keep Current State] is selected for the [Network Settings on Power On] setting
[Infrastructure and Wireless Direct] is selected for the [Selected Interface] setting
3. Start your mobile application, and then tap the Settings icon.
(Mobile Cable Label Tool users must also tap [Printer Settings] - [Printer].)
To Next Page
Loading...
