EasyManua.ls Logo

Brother RJ-4040 - User Manual

Brother RJ-4040
34 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
NETWORK
USER’S GUIDE
Multi-Protocol On-board Ethernet Print Server and Wireless
Ethernet Print Server
This Network User's Guide provides useful information of
network settings using your Brother printer. You can also find
supported protocol information and detailed troubleshooting tips.
To download the latest manual, please visit the Brother Solutions
Center at (http://solutions.brother.com/
). You can also download
the latest drivers and utilities for your printer, read FAQs and
troubleshooting tips or learn about special printing solutions from
the Brother Solutions Center.
Version A
ENG

Table of Contents

Questions and Answers

  • A
    Anthony CooperAug 11, 2025
    What to do if I cannot complete the wireless network setup configuration for my Brother Print Server?
    • C
      Caitlin JohnsonAug 11, 2025
      If you cannot complete the wireless network setup configuration, reconfirm and choose the correct security settings. Also, confirm that the MAC address of the Brother printer is allowed in the filter. Ensure you type the correct SSID name or Network Key by hand. You can also use the Network Setting Tool. If the Wi-Fi indicator is lit, the network is properly connected.
  • S
    Suzanne SparksAug 20, 2025
    What to do if Brother printer is not found on the network during the RJ-4040 installation?
    • M
      Michelle EnglishAug 20, 2025
      If your Brother printer is not found on the network during the RJ-4040 installation, confirm your settings in the installer dialog. Place your Brother printer within about 3.3 feet (1 meter) from the WLAN access point/router when you configure the wireless network settings. Move your Brother printer to an obstruction-free area, or closer to the WLAN access point/router. Move all devices away from the Brother printer or WLAN access point/router.
  • B
    Brittany HumphreyAug 31, 2025
    How to check that my Brother Print Server network devices are working properly?
    • T
      Timothy FordAug 31, 2025
      To check that your network devices are working properly, make sure you have confirmed all instructions in Make sure that the following items are configured before reading this chapter. Print the Network Configuration Report and check that Wireless Link Status is showing Link OK. Ping the Brother printer from your computer using the IP address or the node name. Print the Printer Settings to confirm the state of a wireless connection.

Brother RJ-4040 Specifications

General IconGeneral
BrandBrother
ModelRJ-4040
Maximum Print Resolution (Alternative)203 dpi
Print TechnologyThermal
Maximum Print Width104 mm
Maximum Print Resolution203 dpi
ConnectivityUSB
Weight1.8 kg
Media TypeReceipts
EmulationsEpson ESC/P
Operating SystemWindows
InterfaceUSB
CompatibilityWindows

Related product manuals