Why my computer cannot find the Brother MFC-255CW Print Server?
If your computer can't find the Brother print server, the firewall on your computer might be blocking the necessary network connection. To resolve this, disable the firewall and reinstall the drivers.
What to do if the Brother Print Server is not found during setup?
If the Brother print server isn't found during network print software installation or from the printer driver in Windows, ensure you've set up the IP address for the Brother print server as described in Chapter 2 of the User’s Guide before installing the network print software or printer driver. Also, the problem may be due to mismatched or duplicate IP addresses. Print the Network Configuration List to verify that settings like the IP address are correct for your network. Another solution is to disable the Firewall on your computer and reinstall the drivers. You can also reset the print server to the default factory settings and try the initial setup again.
What to do if the print job is not printed on Brother Print Server?
If a print job is not printing on the Brother print server, the issue might be due to mismatched or duplicate IP addresses. Print the Network Configuration List to check if the IP address settings are correct for your network. Alternatively, reset the print server to its default factory settings and attempt the initial setup again.
What to do if Brother Print Server CD-ROM does not start automatically?
If the CD-ROM with the Brother Print Server software doesn't start automatically, execute Start.exe in the root directory of the CD-ROM.
General| Device Type | Print server |
|---|---|
| Network Protocol | TCP/IP |
| Wireless Standard | IEEE 802.11b, IEEE 802.11g |
| Security | WEP, WPA-PSK, WPA2-PSK |
| Compatible Operating Systems | Mac OS X |
| Interface | Ethernet, USB, Wireless |
To Next Page