EasyManuals Logo

Brother MFC-255CW User Manual

Brother MFC-255CW
170 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #58 background imageLoading...
Page #58 background image
Wireless configuration for Windows
®
using the Brother installer application (For DCP-373CW, DCP-375CW, DCP-377CW,
DCP-593CW, DCP-595CW, DCP-597CW, MFC-495CW and MFC-795CW)
49
4
Configuration in Infrastructure mode 4
Before configuring the wireless settings 4
IMPORTANT
If you have previously configured the wireless settings of the machine, you must reset the network LAN
settings before you can configure the wireless settings again.
(For DCP-373CW, DCP-375CW, DCP-377CW, MFC-253CW, MFC-255CW and MFC-257CW)
Press Menu, a or b to choose Network, press OK. Press a or b to choose Network Reset, press OK.
Press 1 or a to reset and then press 1 or a to accept the change. The machine will restart automatically.
(For DCP-593CW, DCP-595CW, DCP-597CW and MFC-495CW)
Press Menu, a or b to choose Network, press OK. Press a or b to choose Network Reset, press OK.
Press 1 or + to reset and then press 1 or + to accept the change. The machine will restart automatically.
(For MFC-795CW)
Press MENU, a or b to display Network, press Network. Press Network Reset, and choose Yes to
reset and then press Yes for 2 seconds to confirm. The machine will restart automatically.
If you are using Windows
®
Firewall or a firewall function of anti-spyware or antivirus applications, disable
all personal firewall software (other than Windows
®
Firewall), anti-spyware or antivirus applications for the
duration of the configuration. Once you are sure that you can print, configure the software settings
following the instructions again.
You need to temporarily use an Ethernet cable (not included) during configuration.
Your Brother machine supports the use of the first WEP KEY only. If you are using a router that is using
more than one WEP KEY enter the KEY used for the first WEP KEY.
Before configuring your machine we recommend you write down the SSID and Password (if required) for
your wireless network. You will need this information before you continue with the configuration.
Item Record the current wireless network settings
Network name: (SSID/ESSID)
Password

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother MFC-255CW and is the answer not in the manual?

Brother MFC-255CW Specifications

General IconGeneral
Device TypePrint server
Network ProtocolTCP/IP
Wireless StandardIEEE 802.11b, IEEE 802.11g
SecurityWEP, WPA-PSK, WPA2-PSK
Compatible Operating SystemsMac OS X
InterfaceEthernet, USB, Wireless

Related product manuals