Configuring your machine for a network with an Ethernet cable connection (Not available for MFC-253CW, MFC-255CW and
MFC-257CW)
17
2
Using the BRAdmin Professional 3 utility to change the wireless settings
(Windows
®
) 2
Note
• Please use the latest version of the BRAdmin Professional 3 utility that is available as a download from
http://solutions.brother.com
. This utility is only available for Windows
®
users.
• If you are using a firewall function of anti-spyware or antivirus applications, disable all personal firewall
software (other than Windows
®
Firewall), anti-spyware or antivirus applications for the duration of the
configuration. Once you are sure that you can print, configure the software settings following the
instructions again.
• Node name: The node name appears in the current BRAdmin Professional 3 window. The default Node
name is “BRNxxxxxxxxxxxx” or “BRWxxxxxxxxxxxx”. (“xxxxxxxxxxxx” is your MAC Address / Ethernet
Address.)
a Start the BRAdmin Professional 3 utility (from Windows
®
2000/XP, Windows Vista
®
and Windows
Server
®
2003/2008), by clicking Start / All Programs
1
/ Brother Administrator Utilities /
Brother BRAdmin Professional 3 / BRAdmin Professional3.
1
Programs for Windows
®
2000 users
b Choose the print server/machine which you want to configure.
c Choose Configure Device from the Control menu.
d Enter a password if you have set one.
Note
By default, no password is required. To set a password for, double-click the device you want to set a
password. Click Control tab, and then click Change Password. Enter the new password.
e You can now change the wireless settings.
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as APIPA in the BRAdmin Professional 3 utility screen.
• You can find the Node Name and MAC Address (Ethernet Address) from the machine’s control panel.
See Node Name on page 100 and MAC Address on page 112.
To Next Page
Loading...
Need help?
General
