Appendix B
156
B
Repeating letters B
If you need to enter a letter that is on the same key as the letter before, press c to move the cursor to the right
before you press the key again.
Special characters and symbols B
Press l, # or 0, and then press d or c to move the cursor under the special character or symbol you want.
Then press OK to choose it. The symbols and characters below will appear depending on your menu
selection.
For DCP models B
Press a or b repeatedly to enter the text and press OK.
For DCP-373CW, DCP-375CW and DCP-377CW
Press Enlarge/Reduce to move the cursor to the left.
Press Number of Copies to move the cursor to the right.
For other models
Press d or c repeatedly to move the cursor.
Making corrections
B
For DCP-373CW, DCP-375CW and DCP-377CW
If you entered an incorrect letter and want to change it, press Enlarge/Reduce or Number of Copies to
position the cursor under the incorrect letter. Use the a and b keys to change to the correct letter, then press
Number of Copies repeatedly to move the cursor back to the end of the text.
Press Stop/Exit. All letters above and to the right of the cursor will be deleted. Re-enter the correct letter.
For other models
If you entered an incorrect letter and want to change it, press d or c to position the cursor under the incorrect
letter. Use the a and b keys to change to the correct letter, then press c repeatedly to move the cursor back
to the end of the text.
Press Stop/Exit. All letters above and to the right of the cursor will be deleted. Re-enter the correct letter.
Press l for
(space) !
” # $ % & ’ ( ) + , - . /
Press # for : ; < = > ? @ [ ] ^ _
Press 0 for 0 \ { | } ~
Press a or b for characters below
abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789
(space)!"#$%&'() +,-./:;<=>?@[\]^_`{|}~
To Next Page
Loading...
Need help?
General
