Configuring your machine for a wireless network (Not available for DCP-365CN, DCP-395CN and MFC-295CN)
23
3
For Ad-hoc mode 3
a Confirm your network environment. (See page 24.)
b Confirm your wireless network setup method. (See page 25.)
c Configure your machine for a wireless network. (See page 28.)
Wireless configuration and installing drivers and software have been completed.
Ad-hoc mode
Connected to a wireless capable computer without
an access point
or
Infrastructure mode See page 22.
Connected to a computer with an access point
Using the Setup Wizard from the control panel
(Recommended)
Using the Brother installer
application
See page 28.
Windows
®
(See page 62.)
Macintosh (See page 86.)
Installing drivers and software (See the Quick Setup Guide.)
To Next Page
Loading...
Need help?
General
