Wireless Network Connection Functions
20
e
When the following message appears, touch .
When a connection is established, the following
message appears.
f
Touch to exit the setup.
Use the [Machine name] on page 10 of the settings
screen for the wireless LAN function.
■ Setting the wireless LAN connection from the
[Others] menu
The [Others] menu on page 10 of the settings screen
contains the following items.
1 TCP/IP settings can be manually entered.
2 Shows the MAC address.
3 Use when proxy settings are required.
4 Resets the wireless LAN connection settings.
• While connected, the signal strength can be
confirmed by the wireless LAN key in the lower
right of the stitch or pattern type selection screen.
• Once a wireless network connection has been set
up, a wireless network connection will be
established each time the machine is turned on.
However, [Wireless LAN Enable] in the wireless
LAN settings screen must remain set to [ON].
To Next Page
Loading...
