Brother Simplicity SB700T

Questions and Answers

W
woodrandyAug 19, 2025
Why is my Brother Simplicity SB700T not working?
- L
  Laura PetersonAug 19, 2025
  There are several reasons why your Brother Sewing Machine might not be working: * It might not be plugged in, so ensure it is properly connected. * The main power switch could be off, so turn it on. * The bobbin winder shaft might be pushed to the right; move it to the left. * You may not be using the foot controller correctly, so ensure you are using it properly.
P
Phyllis WardAug 21, 2025
Why is my Brother Simplicity SB700T skipping stitches?
- A
  atkinsonaaronAug 21, 2025
  If your Brother Sewing Machine is skipping stitches, consider the following: * Ensure the upper thread is threaded properly; correct the upper threading. * Use the correct combination of fabric, thread, and needle; choose a thread and needle that are appropriate for the type of fabric. * Replace the needle if it is bent or blunt. * Insert the needle properly. * Clean any accumulated dust from under the needle plate or in the bobbin case by removing the needle plate cover and cleaning the plate and bobbin case.
A
angela40Aug 26, 2025
How to fix upper thread breaks on Brother Simplicity SB700T Sewing Machine?
- E
  Elizabeth RobertsAug 26, 2025
  If the upper thread of your Brother Sewing Machine keeps breaking, consider the following: * The upper thread might not be threaded correctly, so correct the upper threading. * There might be knots or tangles in the thread, so remove them. * The needle might not be appropriate for the thread, so choose an appropriate needle. * The upper thread tension might be too tight, so loosen it. * The thread might be tangled, for example, in the bobbin case, so remove the tangled thread and clean the bobbin case. * The needle might be bent or blunt, so replace it.
D
deanjamesAug 28, 2025
Why is the thread tension incorrect on my Brother Simplicity SB700T?
- J
  Jasmine LopezAug 28, 2025
  If the thread tension is incorrect on your Brother Sewing Machine, make sure of the following: * The upper thread is threaded properly; correct the upper threading. * The bobbin thread is wound properly; wind the bobbin thread properly. * You are using the right combination of thread and needle for the fabric; choose a thread and needle appropriate for the fabric. * The presser-foot holder is attached properly; attach the presser-foot holder correctly. * The thread tension is properly adjusted; adjust the tension of the upper thread. * You are using a bobbin designed for your machine; incorrect bobbins will not work properly. Only use a bobbin that has been designed for this machine. * Bobbin is set incorrectly; reset the bobbin thread correctly.
F
ffosterAug 30, 2025
What to do if lower thread is tangled on Brother Simplicity SB700T Sewing Machine?
- J
  Joel DavisAug 30, 2025
  If the lower thread is tangled or breaks in your Brother Sewing Machine, check these: * Ensure you've wound the bobbin thread properly. * Replace the bobbin if it's scratched or doesn't turn smoothly. * Remove any tangled thread and clean the bobbin case. * Make sure you're using a bobbin designed for your machine; incorrect bobbins will not work properly. Only use a bobbin that has been designed for this machine. * Ensure the bobbin is set correctly; reset the bobbin thread correctly.
J
Jennifer BeltranSep 1, 2025
Why is my Brother Simplicity SB700T making a high-pitched noise?
- R
  Richard RaySep 2, 2025
  If your Brother Sewing Machine is making a high-pitched noise, check the following: * Clean the bobbin case, as dust may have built up in the feed dogs or bobbin case. * Ensure the upper thread is threaded properly; correct the upper threading. * Replace the bobbin case if it is scratched. Contact your retailer or the nearest authorized service center. * Use only bobbins designed for this machine; incorrect bobbins will not work properly.
H
Heidi LopezSep 4, 2025
Why can't I use the needle threader on my Brother Sewing Machine?
- B
  benjaminhessSep 4, 2025
  If you cannot use the needle threader on your Brother Sewing Machine, make sure of the following: * Move the needle holder to its highest position by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up or by pressing (needle position button) once or twice. * Insert the needle properly.
K
kimberlyproctorSep 6, 2025
Why is the fabric not feeding through my Brother Simplicity SB700T Sewing Machine?
- W
  wadamsSep 6, 2025
  If the fabric does not feed through your Brother Sewing Machine, check these: * Ensure the feed dogs are not lowered; slide the feed dog position lever to the correct position. * Lengthen the stitch length if the stitch is too fine. * Use the right combination of fabric, thread, and needle; choose a thread and needle that are appropriate for the type of fabric. * Remove any tangled thread and clean the bobbin case if the thread is tangled, for example, in the bobbin case.
J
James LambSep 8, 2025
Why is the fabric wrinkled when using my Brother Simplicity SB700T?
- C
  Clayton BakerSep 8, 2025
  If the fabric is wrinkled while using your Brother Sewing Machine, check the following: * Ensure the upper thread is threaded properly and the bobbin is fitted correctly; thread the upper thread and wind the bobbin thread properly. * Make sure the spool is fitted properly. * Use the right combination of fabric, thread, and needle; choose a thread and needle that are appropriate for the type of fabric. * Replace the needle if it is bent or blunt. * If sewing thin fabric, use a stabilizer material under the fabric if the stitch is too thick. * Adjust the tension of the upper thread if the thread tension is incorrect.
A
Ashley CollinsSep 12, 2025
Why is thread tangled on the wrong side of fabric Brother Simplicity SB700T?
- T
  Tara HernandezSep 12, 2025
  If the thread is tangled on the wrong side of the fabric with your Brother Sewing Machine, it is likely that the upper thread was not threaded correctly, so correct the upper threading.