Why is my Brother Sewing Machine not working?
Your Brother Sewing Machine might not be working because the main power switch is turned off. Turn on the main power switch. Alternatively, the bobbin winder shaft may be pushed to the right; if so, move it to the left. Finally, ensure you are using the foot controller properly.
What to do if stitches are skipped on my Brother Sewing Machine?
If your Brother Sewing Machine is skipping stitches, make sure you have threaded the upper thread properly. Also, ensure that you are using the right combination of fabric, thread, and needle. Replace the needle if it is bent or blunt, and make sure the needle is correctly installed. Remove the needle plate and clean the plate and the bobbin case if dust has accumulated under the needle plate or in the bobbin case.
Why does my Brother ST371HD Sewing Machine fabric not feed properly?
If the fabric does not feed properly through your Brother Sewing Machine, try the following: lengthen the stitch length if the stitch is too fine. Ensure the feed dogs are raised by sliding the feed dog position switch. Also, ensure that you are using the right combination of fabric, thread, and needle. If the thread is tangled, for example, in the race, remove the tangle thread and clean the race.
What to do if the needle breaks on my Brother ST371HD Sewing Machine?
If the needle breaks on your Brother Sewing Machine, it could be due to several reasons. First, ensure the needle is correctly installed. If the needle clamp screw is loose, use a disc-shaped screwdriver to firmly tighten it. Also, the needle might be bent or blunt, in which case you should replace it. Check that the upper thread was threaded correctly, and that you are using the right combination of fabric, thread, and needle. If the upper thread tension is too tight, loosen it. Ensure that you have fitted the spool properly and that you are using a bobbin designed for your machine. If the area around the hole in the needle plate or the presser foot is scratched, or if the bobbin case is scratched, contact your retailer or the nearest authorized service center.
Why does the upper thread keep breaking on my Brother Sewing Machine?
The upper thread on your Brother Sewing Machine may be breaking because it has not been threaded properly. Make sure you have fitted the spool properly and that the thread is correctly guided above the needle, then correct the upper threading. Also, the needle may not be appropriate for the thread you are using, so choose a needle that is appropriate for the type of stitch. If the upper thread tension is too tight, loosen it.
How to fix incorrect thread tension on Brother ST371HD Sewing Machine?
To fix incorrect thread tension on your Brother Sewing Machine, first, ensure that the upper thread is correctly threaded. Wind the bobbin thread properly. Also, ensure that you are using the right combination of thread and needle for the fabric you are using. If the issue persists, adjust the tension of the upper thread and reset the bobbin thread correctly.
Why is the lower thread tangled or breaking in my Brother Sewing Machine?
The lower thread in your Brother Sewing Machine may be tangled or breaking because you have not wound the bobbin thread properly. Wind the bobbin thread properly. If the thread is tangled, remove the tangled thread and clean the race. Ensure the bobbin is set correctly by resetting the bobbin thread correctly.
How to fix the needle threader on my Brother ST371HD Sewing Machine?
To fix the needle threader on your Brother Sewing Machine, raise the needle by turning the handwheel toward you (counterclockwise) so that the mark on the wheel points up. Also, ensure that you have inserted the needle properly.
What to do if the fabric is wrinkled when sewing with my Brother ST371HD Sewing Machine?
If the fabric is wrinkling while sewing with your Brother Sewing Machine, make sure you have threaded the upper thread and wound the bobbin thread properly, and fitted the spool properly. Also, ensure that you are using the right combination of fabric, thread, and needle. If the needle is bent or blunt, replace it. If you are sewing thin fabrics, use stabilizer material under the fabric and shorten the stitch length.
What to do if fabric being sewn with Brother Sewing Machine cannot be removed?
If the fabric being sewn with your Brother Sewing Machine cannot be removed, it may be because the thread is tangled below the needle plate. Lift up the fabric and cut the threads below it, and clean the race.
General| Type | Automatic sewing machine |
|---|---|
| Free arm | Yes |
| Sewing speed | 800 |
| Stitch width | 7 mm |
| Product color | Black, White |
| Stitch length | 4 mm |
| Buttonhole type | 1 Step |
| Number of programs | - |
| Sewing machine functions | Sewing |
| Number of stitch patterns | 37 |
| Number of illumination LEDs | 1 |
| AC input voltage | 110 V |
| Power supply type | Electric |
Precautions to reduce the risk of electric shock during operation.
Warnings regarding burns, fire, electric shock, and personal injury.
Instructions to prevent machine damage and injury from misuse.
Guidelines for maintaining a safe work area and general safety tips.
Safety advice specific to the sewing process and needle area.
Details on included and optional sewing machine accessories.
Identification and description of the sewing machine's main components.
Instructions on connecting and operating the sewing machine.
Explanation of machine controls and how to select stitches.
Step-by-step guide for threading the sewing machine.
Guidance on matching fabric, thread, and needle types.
Fundamental techniques and steps for starting to sew.
Instructions for basic stitches like straight, zigzag, and blind hem.
Details on specialized stitches for decorative and joining purposes.
Overview of decorative and joining stitches for various applications.
Procedure for creating automatic buttonholes with the machine.
Tips for adjusting buttonholes and sewing them on stretch fabrics.
Instructions on how to attach buttons using the sewing machine.
Guide to inserting zippers using the appropriate foot.
Techniques for gathering fabric, darning, and creating appliqués.
Instructions for using the blind stitch foot for hemming and edge finishing.
Steps for cleaning, oiling, and general upkeep of the machine.
Guidelines for proper storage and cleaning to ensure longevity.
A guide to diagnosing and resolving common sewing machine issues.
To Next Page
