Why printed barcode cannot be read on Brother TD-4000 Label Maker?
If the printed barcode from your Brother Label Maker cannot be read, try using a different scanner. It is also recommended to print the barcode with Print Quality options set to 'Give priority to quality'.
Why is my Brother Label Maker TD-4000/4100N not printing?
If your Brother TD-4000/4100N Label printer isn't printing or you're getting an error, try these steps: Ensure the cable is securely connected. Reinstall the RD Roll. Check that enough roll remains. Make sure the RD Roll compartment cover is closed. Turn the printer off and then on again. Adjust the guide against the RD Roll's side. Feed the media under the gap sensor.
What to do if labels are jammed in the cutter of Brother TD-4000 Label Maker?
If labels are jammed in the cutter or are not ejected correctly after printing with your Brother Label Maker, see 'Roller maintenance' on page 28.
How to reset Brother TD-4000 and delete transferred data?
To reset your Brother Label Maker and delete the data transferred from your PC, first turn the machine OFF by pressing and holding the ON/OFF button. Then, hold down the ON/OFF button again for two seconds. While still holding the ON/OFF button, press the Cut button six times.
What to do if I get a cutter error on Brother TD-4000?
If your Brother Label Maker is experiencing a cutter error, keep the RD roll compartment cover closed and press the ON/OFF button. Also, inspect the cutter unit and remove any paper jam.
How to cancel printing job on Brother TD-4000?
To cancel a print job on the Brother Label Maker, ensure the printer is turned ON, and then press the ON/OFF button.
Why is Add-in feature icon not displayed on Microsoft Word for Brother TD-4000 Label Maker?
If the icon of Add-in feature is not displayed on Microsoft® Word when using your Brother Label Maker, quit Microsoft® Outlook®, and restart Microsoft® Word.
Why does Brother TD-4000 pause when printing via USB?
When printing via the USB cable, if your Brother Label Maker repeatedly pauses and then continues printing, set the print mode to buffered printing. Disconnect the LAN cable until USB printing is completed.
What to do if printed barcode cannot be read on Brother TD-4000?
If the printed barcode from your Brother Label Maker cannot be read, try using a different scanner. Also, it is recommended to set the Print Quality options to 'Give priority to quality'.
How to improve print quality on Brother Label Maker?
If the print quality of your Brother Label Maker is poor, clean the roller.
General| Print technology | Direct thermal |
|---|---|
| Vertical printing | Yes |
| Maximum resolution | 300 x 300 DPI |
| Label type | RD |
| Network ready | No |
| Dimensions (WxDxH) | 173 x 229 x 158 mm |
| Standard interfaces | RS-232C |
| Tape cutting | Automatic |
| Internal memory | 2 MB |
| Number of fonts | 5 |
| Number of styles | 9 |
| Built-in barcodes | Codabar (NW-7), EAN13, EAN8, Maxicode, Postnet, QR Code, UPC-A, UPC-E |
| Power requirements | 220-240VAC, 50/60 Hz, 1.8A |
| Minimum RAM | 128 MB |
| Minimum storage drive space | 70 MB |
| Compatible operating systems | Windows XP/7, Windows Vista |
| Bundled software | P-touch PT-Editor 5.0, Transfer Manager 2.1, Transfer Express, Library 2.1 |
| Media thickness | 0.08 - 0.155/0.170 mm |
| Maximum label width | 102 mm |
| Maximum label length | 3 m |
| Maximum roll diameter | 101.6 mm |
| Product color | Gray |
| Operating temperature (T-T) | 10 - 35 °C |
| Operating relative humidity (H-H) | 20 - 80 % |
| Harmonized System (HS) code | 84433210 |
Weight and Dimensions| Depth | 229 mm |
|---|---|
| Width | 173 mm |
| Height | 158 mm |
| Weight | 1810 g |
To Next Page
