Need help?Do you have a question about the Brother TD-4420TN and is the answer not in the manual?
General| Color | No |
|---|---|
| Print technology | Direct thermal / Thermal transfer |
| Maximum resolution | 203 x 203 DPI |
| Maximum print height | 108 mm |
| Maximum printing width | - mm |
| Ethernet LAN | Yes |
| RS-232 ports | 1 |
| USB 2.0 ports quantity | 2 |
| Connectivity technology | Wired |
| Flash memory | 128 MB |
| Internal memory | 64 MB |
| Number of fonts | 8 |
| Built-in barcodes | GS1 DataMatrix, AZTECCODE, CODABAR (NW-7), Code 11, Code 128 (A/B/C), Code 39, Code 49, Code 93, EAN128, EAN13, EAN8, GS1 DataBar, ITF-14, Interleaved 2/5, LOGMARS, MSI, MaxiCode, MicroPDF417, PDF417, PLESSEY, POSTNET, QR Code, UPC-A, UPC-E |
| Page description languages | DPL, EPL, ZPL, ZPL II |
| Package weight | 3927 g |
| Quantity per pack | 1 pc(s) |
| Cables included | AC, USB |
| Core diameter | 25.4 mm |
| Maximum label width | 112 mm |
| Maximum roll diameter | 127 mm |
| Mac operating systems supported | Mac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave |
| Server operating systems supported | Windows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016 |
| Windows operating systems supported | Windows 10, Windows 7, Windows 8, Windows 8.1 |
| Storage temperature (T-T) | -40 - 60 °C |
| Operating temperature (T-T) | 10 - 90 °C |
| Storage relative humidity (H-H) | 25 - 85 % |
| Operating relative humidity (H-H) | 5 - 40 % |
| Product color | Black |
| Languages support | DAN, DEU, DUT, ENG, ESP, FIN, FRE, ITA, NOR, POR, SWE |
| Number of languages | 11 |
| AC input voltage | 100 - 240 V |
| AC input frequency | 50 - 60 Hz |
| AC adapter output current | 2 A |
| Harmonized System (HS) code | 84433210 |
Weight and Dimensions| Depth | 280 mm |
|---|---|
| Width | 204 mm |
| Height | 177.5 mm |
| Weight | 2500 g |
Detailed instructions on how to install a ribbon roll into the printer.
Instructions for loading various types of label media into the printer.
Steps for correctly inserting standard label rolls into the printer.
Procedure to calibrate ribbon and media sensors for optimal performance.
Steps for calibrating sensors, running self-tests, and entering diagnostic dump mode.
Resets the printer's DRAM and restores factory default settings.
Procedure to calibrate the black mark sensor for accurate media detection.
Procedure to calibrate the gap sensor for accurate media detection.
Guide on using BPM to calibrate the media sensor (Gap or Black Mark).
To Next Page
