EasyManuals Logo

Brother TD-4420TN Installation Guide

Brother TD-4420TN
2 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
D01EKR001B
5. Push the Label Peeler Module's cable and ground line through the slot into the main
board compartment.
6. Slide the Label Peeler Module into the lower front panel slot until it locks into place.
7. Connect the cable and ground line to the CON10 and JP2 sockets on the main board.
(The ground line can be connected to any available JP2 socket.)
CON10
8. Reattach the media holder using the four screws.
9. To complete the installation, load the media before you turn on the printer.
For more information about loading the media with the Label Peeler Module installed,
see the User's Guide.
Installation Guide
Label Peeler Module (PA-LP-003, PA-LP-004)
TD-4420TN/TD-4520TN
NOTE
Only Authorized Brother Dealers should perform accessory replacements.
1. Open the printer's Top Cover and push the print head release button to open the
print head.
2. Remove the lower front panel.
3. Close the print head.
4. Remove the four screws on the media holder and then remove it, as illustrated
below.
Screws
Screws
5. Turn over the printer. Remove the six screws on the bottom cover and then remove
it, as illustrated below.
(To avoid scratching the LCD screen, place the printer on a soft cloth.)
Screws
6. Connect the cable and ground line to the CON10 and JP2 sockets on the main board.
(The ground line can be connected to any available JP2 socket.)
CON10
JP2
7. Reattach the Bottom Cover using the six screws.
8. To complete the installation, load the media before you turn on the printer.
For more information about loading the media with the Label Peeler Module installed,
see the User's Guide.
Installation Guide
Label Peeler Module (PA-LP-004)
TD-4650TNWB/TD-4750TNWB
NOTE
Only Authorized Brother Dealers should perform accessory replacements.
1. Open the printer's Top Cover and push the print head release button to open the
print head.
2. Remove the lower front panel.
3. Push the Label Peeler Module's cable and ground line through the slot into the main
board compartment.
4. Slide the Label Peeler Module into the lower front panel slot until it locks into place,
and then close the Top Cover.
JP2

Other manuals for Brother TD-4420TN

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Brother TD-4420TN and is the answer not in the manual?

Brother TD-4420TN Specifications

General IconGeneral
ColorNo
Print technologyDirect thermal / Thermal transfer
Maximum resolution203 x 203 DPI
Maximum print height108 mm
Maximum printing width- mm
Ethernet LANYes
RS-232 ports1
USB 2.0 ports quantity2
Connectivity technologyWired
Flash memory128 MB
Internal memory64 MB
Number of fonts8
Built-in barcodesGS1 DataMatrix, AZTECCODE, CODABAR (NW-7), Code 11, Code 128 (A/B/C), Code 39, Code 49, Code 93, EAN128, EAN13, EAN8, GS1 DataBar, ITF-14, Interleaved 2/5, LOGMARS, MSI, MaxiCode, MicroPDF417, PDF417, PLESSEY, POSTNET, QR Code, UPC-A, UPC-E
Page description languagesDPL, EPL, ZPL, ZPL II
Package weight3927 g
Quantity per pack1 pc(s)
Cables includedAC, USB
Core diameter25.4 mm
Maximum label width112 mm
Maximum roll diameter127 mm
Mac operating systems supportedMac OS X 10.10 Yosemite, Mac OS X 10.11 El Capitan, Mac OS X 10.12 Sierra, Mac OS X 10.13 High Sierra, Mac OS X 10.14 Mojave
Server operating systems supportedWindows Server 2008, Windows Server 2008 R2, Windows Server 2012, Windows Server 2012 R2, Windows Server 2016
Windows operating systems supportedWindows 10, Windows 7, Windows 8, Windows 8.1
Storage temperature (T-T)-40 - 60 °C
Operating temperature (T-T)10 - 90 °C
Storage relative humidity (H-H)25 - 85 %
Operating relative humidity (H-H)5 - 40 %
Product colorBlack
Languages supportDAN, DEU, DUT, ENG, ESP, FIN, FRE, ITA, NOR, POR, SWE
Number of languages11
AC input voltage100 - 240 V
AC input frequency50 - 60 Hz
AC adapter output current2 A
Harmonized System (HS) code84433210
Weight and Dimensions IconWeight and Dimensions
Depth280 mm
Width204 mm
Height177.5 mm
Weight2500 g

Related product manuals