Brother XL-2610 - User Manual

2
1
1
2
e
f
1
XC8537-021
Quick Start Guide 1 – Preparing the bobbin thread – / Guide de démarrage rapide 1 – Préparation du fil de la canette – / Kurzanleitung 1 – Vorbereitung des Spulenfadens –
Verkorte handleiding 1 – De onderdraad voorbereiden – / Guía de inicio rápido 1 – Preparación del hilo de la bobina – / Guida di avvio rapido 1 – Preparazione della spolina –
Be sure to first read the “IMPORTANT SAFETY INSTRUCTIONS” in the Operation Manual. For each step in the procedure, refer to the illustration of the sewing machine in the center for an indication of the exact location of the operation.
Lisez attentivement les “INSTRUCTIONS DE SÉCURITÉ IMPORTANTES” du manuel d’instructions. A chaque étape de la procédure, reportez-vous à l’illustration de la machine à coudre, se trouvant au centre, pour une indication de l’emplacement exact de l’opération.
Lesen Sie in jedem Fall zunächst die “WICHTIGE SICHERHEITSANWEISUNGEN” in der Bedienungsanleitung. Beachten Sie bei jedem Bedienungsschritt die Abbildungen der Nähmaschine in der Mitte, aus denen der genaue Ort der Bedienungsvorgänge zu ersehen ist.
Zorg ervoor dat u eerst de “BELANGRIJKE VEILIGHEIDSINSTRUCTIES” in de handleiding hebt gelezen. Voor elke stap in de procedure raadpleegt u de afbeelding van de naaimachine in het midden voor een verwijzing naar de exacte locatie van de handeling.
Lea primero las “INSTRUCCIONES IMPORTANTES DE SEGURIDAD” del Manual de Instrucciones. Para cada fase del procedimiento, fíjese en la ilustración de la máquina de coser que se encuentra en el centro para saber exactamente dónde se sitúa la operación.
Leggere dapprima le “ISTRUZIONI DI SICUREZZA IMPORTANTI” del manuale d’istruzione. Per ogni passo della procedura, fare riferimento alla figura della macchina da cucire al centro per stabilire così l’esatta posizione dell’operazione.
2
480b
3
c f
5
12 34 6
8
7
90 a
bcd

Summary

Quick Start Guide 1: Preparing the Bobbin Thread

Bobbin Winder Setup

Prepare the bobbin winder mechanism for threading the bobbin.

Place Bobbin and Thread

Place the bobbin onto the winder spindle and position the thread.

Thread Path Guidance

Guide the thread through multiple tension discs and thread guides.

Start Bobbin Winding

Insert the thread end into the bobbin slit and begin winding.

Quick Start Guide 2: Upper Threading

Thread Spool and Guides

Place the thread spool and guide the thread through initial guides.

Thread Tension and Take-Up Lever

Pass the thread through the tension discs and around the take-up lever.

Thread Through Needle Guides

Guide the thread through the upper and lower needle guides.

Insert Thread into Needle

Thread the needle eye, ensuring correct thread direction.

Brother XL-2610 Specifications

General

Type	Mechanical
Buttonhole Styles	1
Maximum Stitch Width	5 mm
Maximum Stitch Length	4 mm
Needle Threading System	Automatic
Feed Type	Drop Feed
Presser Feet	Buttonhole foot, Zipper foot, Zigzag foot
Included Accessories	Needle Set, Bobbins, Screwdriver
Stitch Options	25 built-in stitches
Bobbin Type	Top Drop-in Bobbin