——————————————————————————————————————————————————————————————————————————
■ Storing the spool pin
When placing the cover on the sewing machine
before storing or if the spool pin will not be used,
return the spool pin to its storage position.
Remove the spool from the spool pin, and then
fold up the spool pin, as shown in the illustration,
until it snaps into place to secure it.
■ Installing the spool pin
a
If the spool pin has been removed from the
machine, insert the tab on the spool pin into
the hole on the back of the machine, as
shown.
a Hole
b Tab
b
Push the spool pin down until it locks into
place.
To Next Page
Loading...
Need help?
General
