Brother XR3140 User Manual

69
3
——
——————————————————————————————————————————————————————————————————————————————————————————————————————————————————————
Fagoting
Stitching across an open seam is called “fagoting”. It
is used on blouses and children's clothing. This stitch
is more decorative when thicker thread is used.
a
Use an iron to fold the two pieces of fabric
along their seams.
b
Baste the two pieces of fabric, separated by
about 4.0 mm (3/16 inch), onto thin paper or
a sheet of water-soluble stabilizer.
• If you draw a line down the middle of the
thin paper or water-soluble stabilizer,
sewing is easier.
a Thin paper or water soluble stabilizer
b Basting stitching
c 4 mm (3/16 inch)
c
Attach zigzag foot “J”.
d
Select stitch or .
e
Set the stitch width to 7.0 mm (1/4 inch).
• For details, refer to “Selecting a stitch”
(page 37).
f
Sew with the center of the presser foot
aligned along the center of the two pieces of
fabric.
g
After sewing is finished, remove the paper.
Decorative stitch
N31
Decorative hemming on thin,
medium weight and plain weave
fabrics, heirloom stitching, etc.
5.0 (3/16)
1.5-7.0
(1/16-1/4)
2.0 (1/16)
1.5-4.0
(1/16-3/16)
No No Rfc.
N32
Decorative stitching, smocking
stitching, heirloom stitching, etc.
6.0 (15/64)
1.5-7.0
(1/16-1/4)
1.6 (1/16)
1.0-4.0
(1/16-3/16)
No No Rfc.
N33
Decorative stitching, smocking
stitching, heirloom stitching, etc.
5.0 (3/16)
1.5-7.0
(1/16-1/4)
1.6 (1/16)
1.0-4.0
(1/16-3/16)
No No Rfc.
● Be sure to turn off the main power before replacing the presser foot. Otherwise, injuries may occur if
the foot controller or (start/stop button) is accidentally pressed and the machine starts sewing.
Stitch Name
Pattern
Presser Foot
Pattern
No.
Application
Stitch Width
[mm (inch.)]
Stitch Length
[mm (inch.)]
Twin Needle
Walking Foot
Reverse
(
Rev.
)
/
Reinforcement
(
Rfc.
)
Stitching
Auto
Manual
Auto
Manual
CAUTION
1
2
3

Brother XR3140 Specifications

General

Brand	Brother
Model	XR3140
Category	Sewing Machine
Language	English