Equipment Safety
7
WARNING
Before operating your machine, stop
and read this owners manual. Do not
attempt to operate the unit until you
fully understand the material covered
in this manual. Without the knowledge
contained in this manual, injury or
death can result.
Each operator of the equipment should review this manual every six (6) months.
You are encouraged to duplicate this manual and to distribute it to each operator of
the equipment for
their training and reference. Additional copies are available from Brown
Manufacturing Corporation at no charge.
Warning: Read this manual before operation.
Operators of the equipment must read and understand this manual. Failure to read this
manual and follow these safety and operating instructions could result in serious bodily
injury or even death.
POTENTIAL DANGER AREAS OF ALL BRUSH CUTTERS
1. EXPOSED ROTATING BLADES
2. MATERIAL DISCHARGE
3. PRESSURIZED HYDRAULICS
4. PINCH POINT
5. HOT SURFACES
To Next Page
Loading...