Need help?Do you have a question about the Broyhill A102010903 and is the answer not in the manual?
Details on what the limited warranty covers for material and manufacturer defects.
Assemble the base plates, base covers, and posts with connectors.
Assemble the short and long screens with netting tubes and middle beam connectors.
Attach the assembled short screens to the posts.
Attach the assembled long screens to the posts.
Assemble the long and short sides of the big roof frame with top connectors.
Attach slanting beams, slant beam connectors, and big top connectors.
Attach the middle beams to the big roof frame connectors.
Assemble small roof connection tubes to slant beams and attach hooks.
Attach small roof top beams to slant beams and big top connectors.
Place and secure small roof covers (Y, AA, AB) to the frame.
Attach small roof sloping beam cover plates (AC) to the small roof.
Attach the small top cover (AD) to the small roof.
Attach big roof short beams (AE) and long beams (AG) to slanting and middle beams.
Attach big roof left/right lower beams (AF/AJ, AK/AL) to frame.
Place Big roof middle cover 1 (AM) on the long side of the frame.
Install big roof middle covers 2 (AN) and 3 (AP) on long and short sides.
Install big roof middle small covers (AQ, AR) beside middle covers.
Install big roof left cover (AS) and right cover (AT) beside small covers.
Attach big roof sloping beam cover plates (AU) to the big top.
Hang the curtains (AV) on the netting tubes using rings (HR).
Hang the mosquito netting (AW) on the netting tubes using rings (HR).
Secure the gazebo to the ground using stakes (HS) and base plates (C).
General| Brand | Broyhill |
|---|---|
| Model | A102010903 |
| Category | Outdoor Furnishing |
| Language | English |
To Next Page