BRP ADVEX - Table of Contents

3
CONTENTS
A. GENERAL ................................................................... 4
1. SAFETY INFORMATION 4
2. MINIMAL REQUIREMENT 5
B. THE HELMET .............................................................. 5
1. ANATOMY OF THE HELMET 5
2. HELMET SIZING 5
3. CHIN CURTAIN 6
4. MICROMETRIC CHIN STRAP 7
5. BREATH GUARD 8
6. FACE SHIELD 9
7. SUN VISOR 10
8. MAGNETIC CONNECTOR (IF EQUIPED WITH ELINQ) 12
9. REAR LIGHT (IF EQUIPED WITH ELINQ) 12
10. FACE SHIELD MECHANISM 13
11. NOISE CONTROL SYSTEM 15
12. INNER LINER 15
13. INNER LINER 17
14. VENTILATION SYSTEM 17
C. FIT & USAGE ............................................................ 18
1. HOW TO PUT THE HELMET ON 18
2. PROPER FIT 18
3. TAKE THE HELMET OFF 19
4. OPERATING INSTRUCTIONS 19
D. BEFORE EVERY RIDE ............................................. 21
1. CHECKING THE HELMET 21
2. CHECKING THE CHINSTRAP 21
3. CHECKING THE FACE SHIELD AND SUN VISOR 21
E. OTHER IMPORTANT INFORMATION ...................... 22
1. MODIFICATIONS / ACCESSORIES 22
2. FROSTBITE 22
F. CARE AND MAINTENANCE .................................... 23
1. SHELL CLEANING 23
2. INTERIOR CLEANING 23
3. OUTER SURFACE OF THE FACE SHIELD 23
4. HEATING LENS 23
5. SUN VISOR 24
6. HELMET INSPECTION 24
7. HELMET STORAGE 24
G. TROUBLESHOOTING GUIDE ................................. 25
H. ACCESSORIES AND SPARE PARTS ..................... 26
1. ACCESSORIES 26
2. REPLACEMENT PARTS 26
I. BRP SERVICE ............................................................ 26
1. REPAIR SERVICE 26
2. LIMITED WARRANTY 26
J. HOW TO CONTACT US ............................................ 27