18
C. FIT & USAGE
4. Final connection
• Once the RCA power cable is in place, put on your coat and let the
power cable pass under your left or right arm, depending which side is
your key ring on your jacket;
• Put on your helmet as described in the “1. HOW TO PUT HELMET ON”
section of this manual;
• Grab the RCA power cable at the back of your neck and bring it closer to
the connection housing at the left side of the helmet.
• Next, grab the RCA cable end and connect it to the vehicle power cable.
Ensure that the cables stay away from any moving parts. Do not let the
power cables become entangled in the vehicle and do not drive over
them. Do not use any extension. If the cables are damaged, stop using
them. Discard and replace them with new OEM BRP cables.
The magnets contained in this helmet could interfere with the operation of
electronic devices such as pacemakers. Pleas
before wearing this product.
Also, note that the credit cards’ magnetic stripe could be affected.
D. BEFORE EVERY RIDE
1. CHECKING THE HELMET
Regularly inspect your helmet for damage. Small superficial scratches will
not impair the protective function of your helmet.
In the case of more serious damage (cracks, dents, flaking and cracking
paint, etc.), the helmet should no longer be used.
To Next Page
Loading...
