BRP EXOME - 10. INNER LINER

13
B. THE HELMET
10. INNER LINER
The replaceable inner lining of the EXOME helmet is washable and
ensures both an excellent fit and improved ventilation of the helmet.
The dual-density cheek pads have a specific 3D shape to ensure that the
helmet fits comfortably around the cheeks, and the headliner provides an
optimal fit all around the head.
All interior fittings are made entirely of skin-friendly material. The material
used for the cheek pads and head liner has been treated with an
antimicrobial treatment.
When removing the lining, the cheek pads must first be detached before
taking out the headliner pad. When fitting the lining, remember to insert the
headband pad before the cheek pads.
PAD SIZES
Helmet size
XS
S
M
L
XL
2XL
3XL
Cheek pad
thickness
35
mm
30
mm
25
mm
35
mm
35
mm
30
mm
20
mm
Head
liner
thickness
Top
16
mm
16
mm
16
mm
16
mm
12
mm
12
mm
12
mm
Crown
18
mm
16
mm
16
mm
18
mm
8
mm
6
mm
6
mm
REMOVING THE CHEEK PADS
1. With the jaw in the open position,
detach the Velcro
TM
and the 2 snaps by
pulling the cheek pad towards the
inside of the helmet.
2. Slide the chinstrap into the cheek
pad notch.
3. Repeat these steps for the other
side.
INSTALLING THE CHEEK PADS
1. Before installing the cheek pads,
identify the right and the left sides.
2. Fasten the 2 snaps and attach the
Velcro
TM
upper part in position. Make
sure the strap is in position inside the
cheek pad notch.
3. Repeat these steps for the other
side.