BRP-Rotax
MAINTENANCE MANUAL LINE
Figure 6.3: Coolant check/replenish TYPICAL
1
Radiator cap
2
Expansion tank
Engine test run Engine test run is necessary:
Step
Procedure
1
Operate the engine until the temperatures have stabilized for a period of 5
min. (engine oil temperature between 50 to 70 °C (122 - 160 °F).
2 Switch the engine OFF.
3 Allow the engine to cool down.
4
Check for leaks.
5
Check the coolant level and top up with coolant as required.
12–10–00
Page 6
December 01 2023
Effectivity: 916 i A / C24
Edition 0/Rev. 1
To Next Page
Loading...
