BRP-Rotax
MAINTENANCE MANUAL LINE
INSTALLATION OF SPARK PLUG
Figure 7.20: Spark plugs
1 Ground electrode 2 Head area
Cleaning
m WARNING
Eyes and skin irritation!
Rinse off with water in the case of contact with eyes or skin. May be harmful if
swallowed.
Step
Procedure
1 Before every installation, the spark plug thread and the spark plug seat at
the cylinder head should be cleaned (e.g. to remove residue of silicone heat
compound).
Effectivity: 916 i A / C24
Edition 0/Rev. 1
12–20–00
Page 47
December 01 2023
To Next Page
Loading...
