BRP ROTAX 916 i A Series Maintenance Manual

BRP-Rotax
MAINTENANCE MANUAL LINE
Figure 7.25: Oil tank
Step
Procedure
6 Remove vacuum tool and temporary lines and clamps.
7
Attach control hose 600 mm (23.6 in.) (2) with new 1-ear clamp 10.3 - 12.8
mm (1) on hose nipple (3) of the pop-off valve.
NOTICE
If the pop-off valve piston does not smoothly operate from fully closed position
(resting) to fully open position (under vacuum) or at an excessive vacuum leak,
the complete pop-off valve assembly must be inspected and any malfunction
corrected.
NOTICE
An improperly functioning pop-off valve can adversely affect engine
performance.
Effectivity: 916 i A / C24
Edition 0/Rev. 1
12–20–00
Page 53
December 01 2023

BRP ROTAX 916 i A Series Specifications

General

Brand	BRP
Model	ROTAX 916 i A Series
Category	Engine
Language	English