BRP ROTAX 916 i A Series Maintenance Manual

BRP-Rotax
MAINTENANCE MANUAL LINE
SCHEDULED MAINTENANCE CHECKS
Definition This section lists the periodic inspections which must be carried out after specified periods
of operation.
Intervals Periodic inspections are those which must be performed at 25, 100, 200, 600 hr. intervals
in accordance with Chapter 05-20-00 section Maintenance Schedule.
This means for example that every 100 hr of operation a 100 hr. check must be carried
out. Every 200 hr. of operation a 100 hr. and the additional checks for 200 hr. must be car-
ried out.
Intervals –hours
25 hr 100 hr 200 hr 300 hr 400 hr 600 hr 700 hr
to
2000 hr
100 hr X X X X X X X X
200 hr X X X
600 hr X
100 hr. check or
annual check
• In order to demonstrate continued airworthiness, an engine must be inspected after
every 100 hours of operation or 12 months.
• For the intervals between maintenance work, a tolerance of ±10 hr. is permissible, but
these tolerances must not be exceeded. This means that if a 100 hr. check is actually
carried out at 110 hr., the next check will be due at 200 hr. ±10 hr. and not at 210 hr. ±10
hr.
• If maintenance is performed before the prescribed interval, the next maintenance check
is to be done at the same interval (e.g. if first 100 hr. check is done after 87 hours of op-
eration, the next 100 hr. check must be carried out after 187 hours of operation).
• If engine has less than 100 hours of operation during one year a 100 hr. check must be
carried out. For the annual inspection a tolerance of ±2 months is given.
Special hr. check
NOTE
This maintenance schedule contains a column for a 50 hr. check. This check is
recommended by the manufacturer but not essential, with the exception of oil
change when operating with leaded AVGAS.
25-hr. check • In order to demonstrate continued airworthiness, an engine must be inspected after the
first 25 hours of operation.
• The checks performed at the 25 hr. inspection are the same as for the 100 hr. inspec-
tion. This applies both to newly delivered engines and to overhauled engines.
05–20–00
Page 2
December 01 2023
Effectivity: 916 i A / C24
Edition 0/Rev. 1

BRP ROTAX 916 i A Series Specifications

General

Brand	BRP
Model	ROTAX 916 i A Series
Category	Engine
Language	English