BRP ROTAX 916 i A Series - Instrument and Generator Checks; Engine Instruments Check During Start; Caution Lamp State Check (916 i TYPE C24) - Post Start; Generator Switching Procedure

BRP-Rotax
MAINTENANCE MANUAL LINE
Chapter: 05–20–00
SCHEDULED MAINTENANCE CHECKS
TOPICS IN THIS CHAPTER
Scheduled maintenance checks ..............................................................................................................2
Unscheduled maintenance checks ..........................................................................................................3
Visual inspection.....................................................................................................................................4
Maintenance schedule procedures (maintenance check list) ..................................................................5
Check List/Maintenance Schedule...........................................................................................................6
Maintenance Schedule ............................................................................................................................8
Introduction The owner and/or user is primarily responsible for the maintenance and airworthiness of
the engine. This includes compliance with all applicable airworthiness directives.
This inspection checklist is not intended to be all-inclusive, for no such checklist can
replace the knowledge and experience of a certified aircraft technician. As the party
primarily responsible for the maintenance and airworthiness of the engine, the owner or
user should only have the maintenance work carried out by qualified technicians
(corresponding to the iRMT levels).
Documentation
required
It is the responsibility of the owner and/or user to make sure that the aircraft technician
performing the work on the engine has access to the previous inspection checklist and
any other required documents.
Effectivity: 916 i A / C24
Edition 0/Rev. 1
05–20–00
Page 1
December 01 2023