BRP ROTAX 916 i A Series Maintenance Manual

BRP-Rotax
MAINTENANCE MANUAL LINE
ENGINE CHECK AFTER PROPELLER STRIKE INCIDENTS
Definition A propeller strike is:
• Any incident while the engine is stationary or running which makes it necessary to per-
form repairs on the propeller.
REMOVAL OF THE PROPELLER GEARBOX
Preparation Before the propeller gearbox is removed, the work described below must be carried out to
identify any further malfunctions in the propeller gearbox and rectify them as part of repair
work.
NOTICE
If these checks are omitted, it may be necessary to dismantle the propeller gear-
box again to rectify any faults after it has been repaired.
• General visual inspection. See Chapter 12–20–00
• Engine cleaning. See Chapter 12–20–00
• Remove surrounding assemblies.
• Remove external alternator if installed.
NOTE
The assemblies and lines are only to be removed if necessary and only as far as
is necessary!
05–50–00
Page 2
December 01 2023
Effectivity: 916 i A / C24
Edition 0/Rev. 1

BRP ROTAX 916 i A Series Specifications

General

Brand	BRP
Model	ROTAX 916 i A Series
Category	Engine
Language	English