CHAPTER 7
Specifications
59
7.3 Specifications Type 4606
SPEAKING POSITION
Standardised position: HATS position as defined in
ITU-T Rec. P.64 A = 21.2, B = 12.9, C = 2.3
Variable positions:
A can be adjusted from +15 to +35
B can be adjusted from +30 to –10
C can be adjusted form +20 to –20
Angle resolution: 0.5
Precision: Once mounted, the handset Ear Cap
Reference Position ECRP can be positioned within
1mm relative to the nominal ERP of the HATS pinna.
HANDSET THICKNESS
Min.: 0mm
Max.: 44mm
HANDSET WIDTH
Min.: 26mm
Max.: 66mm
OFFSET ADJUSTMENT
For asymmetrical handset the offset perpendicular to
the handset can be adjusted in the range ± half the
handset width minus 8mm.
END STOP ADJUSTMENT
The End Stop can be adjusted from 8 to 36mm (0mm
is located at the Ear Cap Reference point, ECRP of
the handset)
APPLICATION FORCE
The force that a handset exerts against the HATS
pinna can be adjusted from 0 to 18 N
WEIGHT
Handset Positioner (incl. cradle, excl. handset):
1.4kg
Alignment Jig (excl. cradle): 2.4kg
Brüel&Kjær reserves the right to change specifications and accessories without notice
To Next Page
Loading...
