Bruker CTX - 11 Results

S1 TITAN, T
RACER
5, and CTX User Manual
030.0
112.04.0
54 of 67
11. Resu
lts
Descripti
on
Results
of a measurement are displayed two ways
–
 During
and immediately after a scan.
 Through the Utilities -> Results buttons.
The actual screen configuration varies depending on the selected method and settings defined
under DISPLAY. See DISPLAY Button, page 45.
Past resul
ts
To review
the results of a past analysis
–
Step
Action
Result
1
From th
e
Read
y to Test
screen,
tap the U
tilities button.
The Utilitie
s
screen is
displayed.
2
Tap Results.
A table showing every assay stored in memory, in
reverse
order of Index number (most recent
measurement at the top), is displayed.
3
Touch scroll up and down, left
and ri
ght, to see all assay names.
Tap a measurement to review.
The sample is highlighted.
4
At the b
otto
m of th
e screen, tap
the sample’s
index number.
Results
of the sample’s assay are displayed.
Display
toolbar
To remove the lower toolbar, double tap the center of the screen. To display it again, double tap
again
.
Your Complete Source for
Testing Equipment
www.BergEng.com
Berg Engineering & Sales Company, Inc.
1-847-577-3980
Info@BergEng.com