9 CLEANING
Once in a year, when the heating season begins, make sure to inspect the
smoke pipe and/or additional reheating systems for ashes and residues.
This should be possible through a revision provided on the installed fire-
place insert or the ceramic accumulator block (if mounted). Remove the
ashes with a suitable vacuum cleaner.
When the fireplace was not used for a long time, call the chimney sweep to
inspect and clean your chimney.
All cleaning operations must be carried out while the fireplace is cold –
Risk of burns!
If the ceramic glass pane is only slightly stained, it can be cleaned with a
dry cloth. Cleaning glass from dirty residues can be done easy with a piece
of wet paper towel. Use it to pick some cold ashes from the combustion
chamber of the fireplace. Clean the glass with this wet towel, then wipe the
remaining wet ashes from the glass with a dry paper towel.
Never use abrasive or aggressive cleaners!
Do not use brushes or any other mechanical means to clean
sealing ropes!
During cleaning of glass, please protect the sealing ropes
against getting wet.
Lifetime of sealing ropes will be significantly shorter, if they
are soaked by fluids or cleaning agents.
Curing of the sealing rope can lead to glass breakage! Re-
place it when necessary!
© 2023 Brunner GmbH User Manual Panorama-Fireplace (1.47) 19
To Next Page
Loading...
