Need help?Do you have a question about the Brunner KSO 33 and is the answer not in the manual?
National and local regulations must be observed for installation and operation.
Installation must be performed by an authorized fitter, considering floor structure and combustion air.
Observance of national regulations for lightning protection and equipotential bonding for exhaust systems is mandatory.
Warning about sharp steel needles protruding from parts and the need for protective gloves.
Specifies allowed deviations for the length of thermal concrete parts.
Specifies allowed deviations for the height of thermal concrete parts.
Defines flatness tolerances for parts and base/top support elements.
Specifies allowed deviations for angles in the components.
Defines tolerances for the roundness of components.
Specifies the tolerance for the thickness of component walls.
Details the requirements for adequate combustion air supply to the room.
Outlines requirements for combustion air ducts, including materials and installation.
Specifies requirements for the chimney, connecting piece, and damper flap.
Details requirements for the smoke pipe connecting piece and its installation.
Describes the requirements and functionality of the damper flap.
Step-by-step guide for assembling the basic unit and mounting the base ring.
Detailed steps for assembling the combustion chamber components.
Instructions for assembling and installing the stove front and door.
Steps for assembling the top-mount accumulator.
Instructions for assembling and connecting the Electronic Combustion Control EAS components.
Technical data for functional demonstration of the KSO 33 q.
Details on cladding components, including footprint and height.
Specifies minimum installation distances to walls and ceiling.
Information on the weight of the combustion chamber/accumulator and cladding.
Indicates compliance with specific requirements and limit values.
Technical data for functional demonstration of the KSO 33 r.
Details on cladding components, including footprint and height.
Specifies minimum installation distances to walls and ceiling.
Information on the weight of the combustion chamber/accumulator and cladding.
Indicates compliance with specific requirements and limit values.
Details product specifications including efficiency, output, and energy index.
General| Manufacturer | Brunner |
|---|---|
| Model | KSO 33 |
| Fuel | Wood |
| Flue Diameter | 150 mm |
| Glass Door | Yes |
| Airwash System | Yes |
| Efficiency | 80% |
| Flue Gas Temperature | 250 °C |
| Material | Steel |
To Next Page
