Brunner Panorama - Page 24

Problem Cause Solution
Unsuitable fuel Wood is damp or too big pieces
of firewood are used.
Please use the recommend-
ed fuel as indicated in these in-
structions.
Glass panes are
often dirty
Insufficient combustion air sup-
ply
Put the combustion air adjuster
into ‘fire starting’ or rated power
position.
Check the combustion air supply
and smoke outlet. Call your fire-
place contractor, if possible.
Insufficient chimney draft Call your chimney sweep.
Condensate build-
up
Too damp wood is being used. Please use the recommend-
ed fuel as indicated in these in-
structions.
Insufficient combustion air sup-
ply
Put the combustion air adjuster
into ‘fire starting’ or rated power
position.
Check the combustion air supply
and smoke outlet. Call your fire-
place contractor, if possible.
24 User Manual Panorama-Fireplace (1.47) © 2023 Brunner GmbH