EasyManua.ls Logo

Brusa NLG5 - 4.2 Control Modes and Concepts

Brusa NLG5
47 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Betriebsanleitung NLG5 User’s manual NLG5
12.2003-NLG5xx_179_ab Nr25 9 / 47
4.2 Einführung
Introduction
Übersicht Steuermodi
Overview Control Modes
Mode A
Automatik
Das Ladegerät NLG5 wird über eine interne, program-
mierbare Kennlinie gesteuert.
Automatic
The power of the battery charger NLG5 is internally
controlled by a programmable charging profile.
Mode B
Booster
Der Netzstrom des Master NLG5 oder eines bestehen-
den Ladegerätes wird durch das Booster-Ladegerät ge-
führt. Das Boostergerät misst den Strom und stellt sei-
nen eigenen Strom danach ein.
Dadurch kontrolliert das Mastergerät die Ladekennlinie,
diese wir jedoch um die Leistung des Boostergerätes
verstärkt.
Booster Mode
The mains current of a Master NLG5 or any existing
charger is wired through the Booster-NLG5. The
Booster measures this current an adjusts its own
current accordingly.
As a result, the charging profile is still controlled by the
original battery charger, but power is added by the
Booster charger NLG5.
Mode C
CAN-gesteuert
Das Ladegerät dient nur als Leistungssteller, der seine
Vorgaben von einem externen Batteriemanagement er-
hält. Der Informationsfluss erfolgt über CAN und in bei-
den Richtungen.
CAN controlled
The battery charger is controlled by an external battery
management system. The information exchange is
done by CAN and works in both directions.