Bryant 395C Series User Manual

General guidance on furnace placement and clearances.

Guidelines for installing near cooling equipment to prevent condensation.

Safety requirements for furnaces in garages and hazardous areas.

Requirements for combustion air in unconfined spaces.

Requirements for combustion air in confined spaces.

Requirements for air supply from outdoors.

Instructions for connecting 115-volt power supply.

Instructions for making 24-volt connections.

Connection details for electronic air cleaner.

Connection details for humidifier.

General guidelines and requirements for furnace venting.

Tables for sizing dedicated vent systems for a single furnace.

Tables for sizing vent systems for multiple furnaces.

Tables for common venting furnace with a hot water heater.

Procedures for removing old furnaces from common vent systems.

General requirements before starting the furnace.

Detailed steps of the furnace's operation sequence.

How the blower operates in continuous mode.

Step-by-step guide for initiating furnace startup.

Procedures for adjusting furnace settings like gas input.

How to set the temperature rise by adjusting blower speed.

Setting the thermostat heat anticipator to match amp draw.

Procedures for checking primary limit and draft safeguard controls.

Testing the flow-sensing switch for proper inducer blower operation.

Final checks and cleanup after installation and startup.