9
OPERATING THE THERMOSTAT
Using the fan
When the fan is on, it helps distribute air throughout your home for a more even
temperature in all spaces. You can set the thermostat so that the fan runs only
during your heating and cooling cycles (auto mode) or to run continuously.
The thermostat is set at the factory to run automatically as needed. Here’s how to
change the setting so it runs continuously.
1. Press the fan button on the left. The display message will change from auto
fan to fan on.
2. To return the fan to auto mode, press the fan button
again. You will see fan auto on the display.
To Next Page
Loading...
Need help?
General
