Bryant BUILDER’S MODEL THERMOSTAT User Manual

Form No. PDS TSTAT.0.4
THERMOSTATS
THERMIDISTAT
TM
CONTROL
MODEL
TSTAT
The Bryant electronic thermostat product line consists of pro-
grammable and non-programmable air conditioner, heat pump,
and 2-speed models; a programmable dual fuel model; and a
programmable/non-programmable Thermidistat
TM
Control. Bryant
also offers builder’s and standard programmable thermostats in
both air conditioner and heat pump models. These units feature
non-mercury based electronic controls built into a subtle, slim
plastic enclosure. They require no battery back-up.
FEATURES/BENEFITS
BUILDER’S THERMOSTATS
COMPLETE OFFERING —Non-programmable air conditioner
and heat pump models available.
EASY TO USE —Rubber push buttons provide easy changes to
heating/cooling mode operation, fan operation, and desired tem-
perature setting.
MANUAL CHANGEOVER —Allows manual switches in system
operation when both heating and cooling are needed on the
same day.
STANDARD PROGRAMMABLE THERMOSTATS
Bryant Standard Programmable Thermostats posess the same
features as the Builder’s Thermostats plus:
COMFORT AND ENERGY SAVINGS —5-2 Day Programming
with four temperature changes per day means comfort for the
family.
EASY TO READ —Large LCD with clock.
NON-PROGRAMMABLE THERMOSTATS
CLEAN DESIGN —Features soft, responsive buttons and an
easy-to-read backlit Liquid Crystal Display (LCD).
ACCURATE, RELIABLE TEMPERATURE CONTROL —LCD
shows current room temperature at all times, and desired tem-
perature prompts upon demand.
AUTO CHANGEOVER —Switches system operation automati-
cally when both heating and cooling are needed on the same
day. It can be disabled if not necessary in certain areas of the
country.
OUTDOOR TEMPERATURE DISPLAY —Allows a check of the
temperature outside before leaving home. (Optional on heat
pump and 2-speed models.)
CLEAN FILTER INDICATOR —Tells when it is time to clean the
system’s filter.
BATTERY FREE —Non-volatile RAM chip requires no battery
backup.
EQUIPMENT ON INDICATOR —On all non-programmable mod-
els, HEAT ON or COOL ON indicator is displayed when the
heating or cooling equipment is operating.
PERFECT COMPLEMENT —Completes your Bryant total com-
fort system needs.
LIMITED WARRANTY —Standard 1-year warranty available on
all parts.
PROGRAMMABLE THERMOSTATS
Bryant programmable thermostats possess the same features as
non-programmable thermostats plus:
BUILDER’S MODEL THERMOSTAT
* Models (AC, HP)
PROGRAMMABLE THERMOSTAT, DUAL FUEL,
AND THERMIDISTAT
TM
CONTROL
* Models (AC, HP, 2S)
* Dual Fuel Model (DF)
* Thermidistat
TM
Control Model (RH)
STANDARD PROGRAMMABLE THERMOSTAT
* Models (AC, HP)
NON-PROGRAMMABLE THERMOSTAT
* Models (AC, HP, 2S)

Bryant BUILDER’S MODEL THERMOSTAT Specifications

General

Type	Non-programmable
Stages	1 Heat/1 Cool
Display	Digital
Power Source	Battery
Temperature Range	45°F to 90°F
Mounting	Wall
Compatibility	Single-stage HVAC systems

Summary

Features and Benefits of Bryant Thermostats

Builder's Thermostats

Overview of features for builder-grade thermostats, including ease of use and manual changeover.

Standard Programmable Thermostats

Features of standard programmable thermostats, offering 5-2 day programming for comfort and savings.

Non-Programmable Thermostats

Features of non-programmable thermostats, such as clean design, auto changeover, and clean filter indicator.

Programmable Thermostats

Additional benefits of programmable thermostats, including 7-day programming and smart recovery.

Model Number Nomenclature

Dimensions

Product Data Information

Physical Characteristics

Describes the appearance and dimensions of thermostat models.

Electrical Characteristics

Lists voltage and current requirements for the thermostats.

Environmental Requirements

Specifies operating and storage temperature/humidity limits.

Program Specifications

Outlines temperature ranges, modes, and programmable features.

Wiring Requirements

Details power and wire gauge specifications for installation.

Product Descriptions

Builder's Model Thermostats

Lists specific part numbers and descriptions for builder models.

Standard Programmable Thermostats

Lists part numbers and descriptions for standard programmable models.

Non-Programmable Electronic Thermostats

Lists part numbers and descriptions for non-programmable models.

Programmable Electronic Thermostats

Lists part numbers and descriptions for programmable models.

Thermostat Accessories

Lists available accessories like sensors and backplates.

Thermostat and Thermidistat Control Application

Non-Programmable Thermostat Usage

Explains how non-programmable thermostats are applied with different indoor/outdoor units.

Programmable Thermostat Usage

Explains application usage for programmable thermostats with various systems.

Programmable Dual Fuel Model

Details application for dual fuel thermostats with furnaces and heat pumps.

Thermidistat Control

Explains application and features of the Thermidistat Control for humidity.

Operational Information

Compressor and Cycle Timers

Information on 5-minute compressor timeguard and 15-minute cycle timer.

Staging and Minimum On Time

Details on 15-minute staging timer and minimum on time for equipment.

Heat/Cool Set Points

Explains the enforced difference between heating and cooling desired temperatures.

Equipment On Indicators

Describes indicators for heating/cooling equipment status on various models.

Humidity Control Indicators

Details indicators for humidify/dehumidify output status on Thermidistat Control.

Auto Changeover Mode

Explains the functionality and disable option for auto changeover mode.

Emergency Heat and Smart Recovery

Covers emergency heat mode and smart recovery transition for programmable models.

Temperature Offset and Deadband

Information on room temperature offset and maximum ON/OFF deadband settings.