Bryant SYSTXBBECC01-B User Manual

SYSTXBBECC01--B
Evolutionr Connext Control
Installation Instructions
A170204B
NOTE: Read the entire instruction manual before starting the installation.
NOTE: Please refer to the literature provided with the connected HVAC equipment
for more details on system operations with specific pieces of equipment.
The features and functions outlined in the Installation Instructions reflect Version 1.3 or
later software. Occupancy sensing compatibility is only available with Series B
Evolution Connex Controls. See the Evolution Connex product page on the
HVACPartners.com website or the Downloads section of the
www.MyEvolutionConnex.Bryant.com
website for the latest software release and
literature.
US Patents: Carrierr U.S. Pat No. 7,243,004, Carrierr U.S. Pat No. 7,775,452,
pointSETt U.S. Pat No. 7,415,102

Bryant SYSTXBBECC01-B Specifications

General

Brand	Bryant
Model	SYSTXBBECC01-B
Category	Thermostat
Language	English

Summary

Safety Considerations

Introduction

Quick Start

Time and Date Settings

Configure system time, date, and time zone for accurate operation.

Dealer Information Setup

Upload dealer contact information and logo for branding.

Installation

Installation Overview and Checks

Covers installation overview, equipment check, location, and sensor placement.

Wiring and Component Installation

Details wiring considerations, communication bus, damper module, and mounting.

Humidifier Connections

Wire bypass and fan powered humidifiers according to type.

Commissioning

Equipment Identification and Configuration

Control identifies equipment and guides selection of components like heaters and evaporators.

Zoning, Filter, and Accessory Setup

Configure zoning, select filter type, and indicate humidifier/UV light installation.

System Verification and Assessment

Review equipment summary, verify airflow, and perform duct assessment.

Service Menu

System Setup Options

Configure thermostat, fan coil, furnace, AC/HP, geothermal, zoning, and accessories.

Equipment Checkout and Status

Test installed components and view operational status, history, and information.

Advanced Diagnostics and Events

Access diagnostics, view system events, run/fault history, and service contact info.

Refrigerant Charging Procedures

Charging, Pump Down, and Evacuation

Perform charging, pump down, evacuation, and EXV position settings.

Wireless Network Setup

Wi-Fi Connectivity Setup

Establish Wi-Fi connection using home or dealer-provided router/access point.

Wiring Diagrams

Regulatory Statements

FCC Interference Statement

Details FCC compliance for Class B digital devices and interference mitigation.