Bryant SYSTXBBWEC01-B User Manual

Installation Instructions
A180277 A180218B
NOTE: Read the entire instruction manual before starting the installation.
NOTE: Please refer to the literature provided with the connected HVAC equipment for more
details on system operations with specific pieces of equipment.
The features and functions outlined in the Installation Instructions reflect Version 1.3 or later
software. Occupancy sensing compatibility is only available with Series B Evolution Connex
Control. See the Evolution Connex product page on the HVACPartners.com website or the
Downloads section of the www.MyEvolutionconnex.Bryant.com website for the latest software
release and literature.
US Patents: Carrier U.S. Pat No. 7,243,004, U.S. Pat No. 7,775,452, pointSET™ U.S. Pat No.
7,415,102
SYSTXBBECC01-B, SYSTXBBWEC01-B,
SYSTXBBECF01-B, SYSTXBBWEF01-B
Evolution® Connex™ Control

Bryant SYSTXBBWEC01-B Specifications

General

Product Type	Thermostat
Series	Evolution Connex
Compatibility	Bryant Evolution System
Wi-Fi Connectivity	Yes
Color	Black
Energy Saving Features	Yes
Remote Access	Yes
Programmable	Yes
Humidity Control	Yes
Dehumidification	Yes
Indoor Air Quality Integration	Yes
Geofencing	Yes
Energy Usage Reports	Yes
Alerts and Notifications	Yes
Mobile App	Yes
Display	Touchscreen
Voice Control	Amazon Alexa

Summary

Safety and Introduction

Safety Considerations

Essential safety warnings and precautions for installation and operation.

Installation Procedures

Installation Overview and Equipment Check

Component Location Guidelines

Recommendations for optimal placement of wall controls and sensors.

Wiring Considerations and Damper Control

Best practices for wiring, communication bus configuration, and damper module installation.

Commissioning Process

Commissioning: System Detection and Configuration

Process of detecting indoor/outdoor units, selecting accessories, and configuring zones.

Equipment Selection and Accessory Configuration

Airflow Verification and Duct Assessment

System Setup and Configuration

Thermostat, Fan Coil, and Furnace Setup

AC/Heat Pump, Geothermal, and Zoning Setup

Accessory, Utility, and Hydronic Configuration

Component Checkout and Service Information

Component Checkout Procedures

System Status and Diagnostics

Accessing detailed system status, fault history, and advanced diagnostic information.

Refrigerant Charging Procedures

Detailed steps for proper refrigerant charging for advanced heat pump and AC systems.