Bryant T2-NHP User Manual

16
ADVANCED OPTIONS
Changing from Fahrenheit to Celsius
Your thermostat is preset to display the temperature in degrees
Fahrenheit. You can change this to Celsius.
1. Press and hold the mode button for about three seconds.
The display will show U1 and the letter F in the center.
2. Press the up or down button on the right to change it
from F (Fahrenheit) to C (Celsius).
3. Press the fan button on the left to exit this screen.

Bryant T2-NHP Specifications

General

Brand	Bryant
Model	T2-NHP
Category	Thermostat
Language	English