14
A150024
On Web Portal:
1. Select Schedule tile.
2. Select New Vacation
3. Enter the depart and return date and times
4. Select Heat and Cool.
5. Enable or disable heat and cool during the period as required.
6. Select the set points for heat and/or cool.
7. Select Save.
8. Select Fan and set the minimum fan run time per hour, if different than your normal settings.
9. Select Save.
The vacation event is now set. You can adjust it at any time by selecting it from the Vacation tile.
Humidifier
The Humidifier menu enables or disables a whole home humidifier, if installed:
S On: Run the humidifier to increase the humidity to the configured set point.
S Off: Do not operate the humidifier.
On Thermostat and Smartphone App:
Touch Menu > System > Humidifier
On Web Portal:
1. Select the My System tile
2. Select Humidifier
There are two options for humidity control:
S Manual: you select the humidity set point
S Window Protect: Creates comfortable humidity levels in the home while preventing condensation from forming on your windows.
On Thermostat and Smartphone App:
1. Touch Menu > Profiles > Humidity Profiles > Humidification Setpoint
2. For manual adjustment, touch Manual then use the up or down arrows to select the desired humidity set point between 5% -- 45%
3. To use Window Protect, touch Window Protect then use the up or down arrows to select the desired level between 1 -- 7, with 7 being
for the most efficient windows.
4. Touch Save
To Next Page
Loading...
Need help?
General
