Need help?Do you have a question about the Brymen BM859CF and is the answer not in the manual?
General| Type | Digital Multimeter |
|---|---|
| Resistance Measurement | Yes |
| Capacitance Measurement | Yes |
| Frequency Measurement | Yes |
| Temperature Measurement | Yes |
| Battery | 9V |
| Continuity Test | Yes |
| Diode Test | Yes |
| True RMS | Yes |
| Backlight | Yes |
| Data Hold | Yes |
| Min/Max Recording | Yes |
| Relative Mode | Yes |
| Auto Power Off | Yes |
| Safety Rating | CAT III 1000V, CAT IV 600V |
| Low Battery Indication | Yes |
| Power Supply | 9V battery |
| Display | LCD with backlight |
| Max Voltage | 1000V DC/AC |
| Max Current | 10 A |
| DC Current Range | 600μA to 10A |
| AC Current Range | 600μA to 10A |
| Frequency Range | 10Hz to 10MHz |
Defines WARNING for serious injury/death and CAUTION for damage/malfunction.
Precautions for voltages, touching leads, and finger guards.
Fuse ratings, open circuit voltage, and lead insertion rules.
Measures AC via average value calibration for sine waves.
Accurately measures AC component regardless of waveform.
Calculates total RMS from DC and AC components.
How to select AC, DC, DC+AC voltage and ~Hz functions.
How to select and perform resistance measurements.
Using the meter for industrial process control loop testing.
Safety precautions before opening the meter case.
Guidance for operational failures and component protection.
Details required battery type and fuse ratings for models.
Steps for replacing the battery in different models.
Steps for replacing fuses in splash-proof and other models.
To Next Page
