Need help?Do you have a question about the Brymen BM786 and is the answer not in the manual?
General| Brand | Brymen |
|---|---|
| Model | BM786 |
| Category | Multimeter |
| Language | English |
Explains standard safety and equipment symbols used in the manual.
Describes applicability for circuits at the source of building's low-voltage mains installation.
Describes applicability for distribution part of building's low-voltage mains installation.
Describes applicability for utilization points like socket outlets in low-voltage mains installation.
Explains the analog bar graph for visual indication of measurements.
Explains the BeepLit™ Continuity function for checking wiring and switches.
Details nS Conductance as the inverse of resistance for leakage measurements.
Explains BeepLit™ Diode function for forward voltage drop and shorted diode indication.
Describes how to enable/disable °F and °C readings for temperature measurements.
Details how to perform microampere current measurements using the instrument.
Describes NCV for detecting electric fields around energized conductors.
Details single-pole EF detection for more precise indication of live wires.
Explains how to record maximum, minimum, and average readings.
Describes offsetting measurements with a displayed reference value.
Explains capturing instantaneous peak values (voltage/current) as short as 0.25ms.
How to temporarily disable the APO feature during power-on.
How to toggle beep tone ON/OFF and its exceptions.
Temporarily shortens APO idling time for production inspection.
Details on enabling/disabling °C or °F availability for temperature.
Basic steps to resolve common instrument operation issues.
Information on accuracy specifications and calibration recommendations.
To Next Page
