Need help?Do you have a question about the Bryston 3B SST and is the answer not in the manual?
General| Power Output (4 ohms) | 200 Watts |
|---|---|
| Frequency Response | 20 Hz - 20 kHz |
| Input Impedance | 20 kOhms |
| S/N Ratio (A-weighted) | 110 dB |
| Total Harmonic Distortion (THD) | <0.005% |
| IM Distortion | <0.01% |
| Damping Factor | 500 |
| S/N Ratio | 110 dB |
Explains how to choose between balanced/single-ended inputs and set the desired gain sensitivity.
Describes how to connect speakers using banana plugs, spade lugs, or bare wire to the binding posts.
Details LED states (unlit, red, green, flashing red, orange) for power, mute, clipping, and thermal shutdown.
Covers the main circuit breaker function and proper AC power cord connection procedure.
Detailed technical data for the 3BSST, including power, gain, impedance, distortion, dimensions, and weight.
Detailed technical data for the 4BSST, including power, gain, impedance, distortion, dimensions, and weight.
To Next Page
